Ask Proxima C460 manual Displaying a video image

Page 16

Displaying a video image

Remove the lens cap.	remove lens cap

Press the power switch on the back of the projector to the on position, then press the Power button on the top of the projector.

The LED flashes green and the fans start to run. When the lamp comes on, the startup screen is displayed and the LED is steady green. It can take a minute for the image to achieve full brightness.

?No startup screen? Get help on page 19. Plug in and turn on the video device.

The video device’s image should appear on the projection screen. If it doesn’t, press the Video button on the keypad.

press Power switch press Power button

2

I	O

1

turn on video device

Adjust the height of the projector, if necessary, by pressing the release but-	adjust height	release
tons on each side of the projector’s front to extend the elevator feet.		button

elevator foot

release button

elevator foot

Position the projector the desired distance from the screen at a 90 degree

angle to the screen. See page 43 for a table listing screen sizes and distances adjust distance to the screen.

16

Image 16

Contents User’s Guide Trademarks Table of Contents Important Operating Considerations for Safety Accessories Projector components and features backIntroduction Online RegistrationConnector Panel Positioning the projector Required computer connections Connecting a computerOptional computer connections Visit our website for information on ProjectorNet Displaying a computer image First-time projector use with Windows Wizard launches two times For Windows 2000, Windows ME, and Windows XPAdjusting the image Standard video connections Connecting a video deviceOptional video connections Connect BNC cables Displaying a video image You can also adjust the zoom and focus via the menus. See Troubleshooting your setup Power SaveShutting down the projector Screen SaveSolution Computer image projectedRange Out Image clear and not cropped Page Color Lamp won’t turn on, Lamp LED blinking red Lamp won’t turn on, Temp LED solid redLamp may need to be replaced Lamp turns on Still having problems? Using the keypad buttons Using the remote control Troubleshooting the remoteTroubleshooting audio Using the audioConnecting external speakers Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Picture menu Presets Advanced settings Settings menu Screen Save PiP Enable PiP Position Effect Key Network Cleaning the lens MaintenanceChanging the lens Replacing the projection lamp Resetting the lamp timer Using the security lock Cleaning the dust filterTroubleshooting Projected image size AppendixWidth Image Feet/m LED Behavior LED color/behavior MeaningRS-232 commands Communication ConfigurationCommand Format Setting ValueError Conditions LimitationsINT at RW Disable Enable = Japanese = Korean = Portuguese = Russian = Norwegian NND Page Ntsc Index NumericsPage XGA Limited Warranty Warranty Limitation and ExclusionDisclaimer of Unstated Warranties