Ask Proxima C460 manual Connecting a computer, Required computer connections

Page 8

Connecting a computer

connect computer cable

Required computer connections

Connect one end of the VESA computer cable to the Computer 2 connector on the projector. Connect the other end to the video port on your computer. If you are using a desktop computer, you first need to disconnect the moni- tor cable from the computer’s video port.

Connect the black power cable to the connector on the back of the projector	connect power cable
and to your electrical outlet.
NOTE: Always use the power cable that shipped with the projector.

Optional computer connections

	To control your computer’s mouse using the projector’s remote control, con-	connect M1-D cable
	nect the USB and DVI cables to the USB and DVI ports on your computer,
	and connect the other end to the Computer 1 (M1-D) connector on the pro-
	jector. USB drivers must be installed to use the USB feature. For more infor-
	mation, see page 12.

	If your projector cannot receive the remote’s signal due to IR interference,	connect wired remote
	you can connect directly to the projector via a remote cable. To do so, plug	connect wired remote

	the remote cable into the wired remote connector on the projector. Plug the
	other end into the connector on the remote,

To have sound with your presentation, connect the audio cable to your com-	connect audio cable
puter and to the corresponding computer Audio In connector on the projec-
tor.

8

Image 8

Contents User’s Guide Trademarks Table of Contents Important Operating Considerations for Safety Accessories Projector components and features backIntroduction Online RegistrationConnector Panel Positioning the projector Optional computer connections Connecting a computerRequired computer connections Visit our website for information on ProjectorNet Displaying a computer image First-time projector use with Windows Wizard launches two times For Windows 2000, Windows ME, and Windows XPAdjusting the image Optional video connections Connecting a video deviceStandard video connections Connect BNC cables Displaying a video image You can also adjust the zoom and focus via the menus. See Troubleshooting your setup Power SaveShutting down the projector Screen SaveSolution Computer image projectedRange Out Image clear and not cropped Page Color Lamp may need to be replaced Lamp turns on Lamp won’t turn on, Temp LED solid redLamp won’t turn on, Lamp LED blinking red Still having problems? Using the keypad buttons Using the remote control Troubleshooting the remoteConnecting external speakers Using the audioTroubleshooting audio Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Picture menu Presets Advanced settings Settings menu Screen Save PiP Enable PiP Position Effect Key Network Changing the lens MaintenanceCleaning the lens Replacing the projection lamp Resetting the lamp timer Troubleshooting Cleaning the dust filterUsing the security lock Width Image Feet/m AppendixProjected image size LED Behavior LED color/behavior MeaningRS-232 commands Communication ConfigurationCommand Format Setting ValueError Conditions LimitationsINT at RW Disable Enable = Japanese = Korean = Portuguese = Russian = Norwegian NND Page Ntsc Index NumericsPage XGA Limited Warranty Warranty Limitation and ExclusionDisclaimer of Unstated Warranties