Tape Operation/Recording
En | IMPORTANT! | |
– | Recording is permissible if copyright or | |
gli | other rights of third parties are not | |
sh | infringed upon. | |
| – | Recording is possible only on tape deck 2. |
Preparation for Recording
1Press TAPE (TAPE 1•2) to select TAPE 2.
2Load a recordable tape into tape deck 2 with full spool to the left.
3Prepare the source to be recorded. CD – load the disc(s).
TUNER – tune to the desired radio station. TAPE – load the prerecorded tape into tape deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
➜ 
starts flashing.
●It is not possible to listen to another source except for dubbing tapes.
●It is not possible to activate the timer function.
One Touch Recording
1Press CD, TUNER or AUX to select the source.
2Start playback of the selected source.
3Press REC to start recording.
To stop recording
●Press Çon the system.
Note:
– One Touch Recording is not possible in TAPE mode, "SELECT SOURCE" will be displayed.
24
pg | 24 |
CD Synchro Recording
1Press CD 1•2•3 to select the disc.
●Press í or ë to select the desired track to start recording.
●You can program the tracks in the order you want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2Press REC to start recording.
➜ The disc will start playback automatically.
To select another track during recording
1Press PAUSEÅ to interrupt recording.
2Pressí or ë to select the desired track.
3Press PLAYÉ to resume recording.
To stop recording
●Press Ç.
➜ Recording and disc playback will stop simultaneously.
Dubbing Tapes
1Load the prerecorded tape in tape deck 1. ● You can set the tape to the desired passage
where recording will start.
2Press DUBBING.
➜Playing and recording will start simultaneously.
➜"DUB OOO" will be displayed.
●Dubbing of tapes is possible on one side of the tape only. To continue record on the reverse side, at the end of side A, flip the tapes to side B and repeat the procedure.
To stop dubbing
●Press Ç. Notes:
–Dubbing of tapes is possible only from tape deck 1 to tape deck 2.
–To ensure good dubbing, use tapes of the same length.
–You can listen to another source while dubbing.
12/11/01, 5:25 PM 3139 115 21151