Tape Operation/Recording
To change the playback mode
●Press AUTO REPLAY repeatedly to select the different playback modes.
➜ "AUTO REPLAY" ( å ) or "ONCE" will appear on the display.
AUTO REPLAY …the tape will rewind automatically at the end of playback and replay again. It will replay up to a maximum of 20 times until you press Ç.
ONCE .............. the tape will playback the
selected side once and then stop.
To rewind or fast forward when playback is stopped
1Press à or á.
2Press Ç when the desired passage reached.
To reset tape counter number
●When in stop mode, pressÇ.
➜ “T1 000” or “T2 000” will be displayed.
Notes:
–During rewinding or fast forwarding of a tape, it is also possible to select another source (CD, TUNER or AUX, for example).
–The tape counter will automatically set to zero after detecting end of tape.
General Information on
Recording
●For recording, use only tape of IEC type I (normal tape).
●The recording level is set automatically, regardless of the position of the Volume,VAC, DSC and so forth.
●The tape is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds.
●To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
●If “CHECK TAPE” is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening.
E n g l i s h
23
pg | 23 | 12/11/01, 5:25 PM 3139 115 21151 |