Installing the Batteries

Introduction—Continued

1 To open the battery compartment, press the small hollow and slide open the cover.

2 Insert the two supplied batteries (AA/R6) in accordance with the polarity diagram inside the battery compartment.

3 Slide the cover shut.

Notes:

•If the remote controller doesn’t work reliably, try replacing the batteries.

•Do not mix new and old batteries or different types of batteries.

•If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

•Expired batteries should be removed as soon as possi- ble to prevent damage from leakage or corrosion.

Aiming the Remote Controller

When using the remote controller, point it toward the A-9377’s remote control sensor, as shown below.

Remote control sensor

About 5 m (16 feet)

Notes:

•The remote controller may not work reliably if the A-9377 is subjected to bright light, such as direct sun- light or inverter-type ﬂuorescent lights. Keep this in mind when installing.

•If another remote controller of the same type is used in the same room, or the A-9377 is installed close to equipment that uses infrared rays, the remote control- ler may not work reliably.

•Do not put anything on top of the remote controller, such as a book or magazine, because a button may be pressed continuously, thereby draining the batteries.

•The remote controller may not work reliably if the A-9377 is installed in a rack behind colored glass doors. Keep this in mind when installing.

•The remote controller will not work if there’s an obsta-

cle between it and the A-9377’s remote control sensor.

A-9377 specifications

The Onkyo A-9377 is a distinguished integrated amplifier that captures the essence of high-fidelity audio. Renowned for its robust sound performance and refined design, this unit serves both audiophiles and casual listeners alike. The A-9377 demonstrates Onkyo's commitment to delivering exceptional audio quality through meticulous engineering and advanced technologies.

One of the standout features of the A-9377 is its discrete analog amplifier section. This architecture allows for high current delivery and exceptional dynamic range, enabling the unit to drive a wide range of speaker types with ease. The amplifier offers a power output of 100 watts per channel into 8 ohms, ensuring that it can fill medium to large rooms with rich, immersive sound.

The A-9377 also incorporates a high-quality digital-to-analog converter (DAC), which is essential for achieving superior audio playback from digital sources. With 192 kHz/24-bit processing capabilities, the DAC ensures that every detail of the audio signal is preserved, delivering crystal-clear sound with minimal distortion.

Additionally, the amplifier features multiple connectivity options, including several analog inputs, digital inputs, and a phono input for vinyl enthusiasts. This versatility allows users to connect a variety of devices, from CD players and turntables to modern digital sources like smartphones and streaming devices.

User convenience is further enhanced by the inclusion of a remote control, making it easy to adjust settings from a distance. The A-9377 also supports a user-friendly interface, allowing listeners to switch between inputs and adjust volume levels effortlessly.

The build quality of the Onkyo A-9377 is commendable, with a solid chassis that minimizes resonance and external interference. This attention to detail in construction contributes to the amplifier's ability to produce a clean, accurate soundstage.

In conclusion, the Onkyo A-9377 is a versatile integrated amplifier that combines classic analog warmth with modern digital technology. Its powerful performance, extensive connectivity options, and elegant design make it a worthy addition to any audio setup, ensuring an enjoyable listening experience for all types of music lovers. Whether you're a home theater enthusiast or a fan of two-channel audio, the A-9377 is designed to elevate your audio experience to new heights.