7.MODE
Depending upon which input signal is selected, selects an available picture setup mode. See "Application Mode" on page 48 for details.
When a wireless module is installed and the Wireless Connection menu is displayed, press this button to change among LAN, IEEE 802.11 a, and IEEE 802.11 b/g. (The wireless module is available through BenQ retailers.)
8.BLANK
Used to hide the screen image. To restore the image, press any button (except LASER) on the projector or remote control. See "Hiding the image" on page 40 for details.
9.ENTER
Enacts the selected
10.Temperature warning light Lights up red if the projector's temperature becomes too high. See "Indicators" on page 60 for details.
11.Lamp indicator light
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 60 for details.
12.AUTO
Automatically determines the best picture timings for the displayed image. See
When a wireless module is installed, the Wireless Connection menu is displayed and the IEEE 802.11 a is selected, press this button to search for a reliable channel. (The wireless module is available through BenQ retailers.)
13.SOURCE
Sequentially selects the input signal D- Sub (Analog RGB), Comp. (YPbPr),