BenQ MP770 user manual Picture menu

Picture menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION	DESCRIPTION
(default setting /
value)
Application	Pre-defined application modes are provided so you can optimize your
	projector image set-up to suit your program type. See "Selecting an
Mode
	application mode" on page 38 for details.
(PC:
Presentation;
YPbPr/ S-Video/
Video: Movie)
Reference	Selects an application mode that most suits your need for the image
	quality and further fine-tune the image based on the selections listed on
	the same page below.
Brightness	Adjusts the brightness of the image.

(50)See "Adjusting brightness" on page 39 for details.

Contrast Adjusts the degree of difference between dark and light in the image.

(0)See "Adjusting contrast" on page 39 for details.

	Adjusts the color saturation level -- the amount of each color in a video
Saturation	image. Lower setting produces less saturated colors; setting to the
	minimum value makes the image black and white. If the setting is too
(0)
	high, colors on the image will be overpowering, which makes the image
	unrealistic.
Hue	Adjusts the red and green color tones of the image. The higher the value,
	the more greenish the image becomes. The lower the value, the more
(0)
	reddish the image becomes.
Sharpness	Adjusts the image to make it look sharper or softer.
(16)
White Peak	Adjusts white peaking.
(10)
Color	There are four color temperature settings are available.
Temperature	See "Selecting a color temperature" on page 39 for details.
(T3)
Gamma	Sets how gray shades are displayed between minimum input (black) and
	maximum input (white) for all signals.
(Gamma 2)
Save	Saves the settings made for User 1 or 2 mode.
Settings

48 Operation