BenQ MS502, MX503 user manual Magnifying and searching for details, Selecting the aspect ratio

Page 24

To select the source:

1.Press SOURCE on the projector or remote control. A source selection bar displays.

2.Press / until your desired signal is selected and press MODE/ENTER.

Once detected, the selected source information will display at the corner of the screen for seconds. If there is multiple equipment connected to the projector, repeat steps 1-2 to search for another signal.

Computer1/YPbPr1

Computer2/YPbPr2

Video

S-Video

•The brightness level of the projected image will change accordingly when you switch between different input signals. Data (graphic) "PC" presentations using mostly static images are generally brighter than "Video" using mostly moving images (movies).

•The native display resolution of this projector is in a 4:3 aspect ratio. For best display picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the “aspect ratio” setting, which may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" on page 24 for details.

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture.

•Using the remote control

1.Press Digital Zoom+/- to display the Zoom bar. Press Digital Zoom+ to magnify the center of the picture. Press the key repeatedly until the picture size is suitable for your need.

2.Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture.

3.To restore the picture to its original size, press AUTO. You can also press Digital Zoom-. When the key is pressed again, the picture is further reduced until it is restored to the original size.

•Using the OSD menu

1.Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.

2.Press to highlight Digital Zoom and press MODE/ENTER. The Zoom bar displays.

3.Press repeatedly to magnify the picture to a desired size.

4.To navigate the picture, press MODE/ENTER to switch to the panning mode and

press the directional arrows ( , , , ) on the projector or remote control to navigate the picture.

5.To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/ out function, and press AUTO to restore the picture to its original size. You can

also press repeatedly until it is restored to the original size.

The picture can only be navigated after it is magnified. You can further magnify the picture while searching for details.

Selecting the aspect ratio

The “aspect ratio” is the ratio of the image width to the image height. Most analog TV and some computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio.

24 Operation

Page 23 Page 25
Image 24
Page 23 Page 25
Contents MS502/MX503 Digital Projector Table of contents Important safety instructions Safety InstructionsSafety Instructions 3000 m Feet Ceiling mounting the projector Projector features IntroductionShipping contents Projector exterior view Front/upper side Rear/lower sideControls and functions Remote control Remote control effective range Replacing the remote control batteryPositioning your projector Choosing a locationFront Table Front CeilingProjection dimensions Obtaining a preferred projected image sizeScreen size DiagonalConnection ConnectionConnecting video source devices Connecting audioTerminal name Terminal appearance Component Video Better Good NormalOperation Starting up the projectorAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarityCorrecting keystone Using the menus Below is the overview of the OSD menuUsing a security cable lock Utilizing the password functionSetting a password Highlight Change Security Settings and press MODE/ENTERIf you forget the password Entering the password recall procedureSwitching input signal Changing the passwordDisabling the password function Magnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Operation Using Wall Color Selecting a picture modeSetting the User 1/User 2 mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes Adjusting Brilliant Color3D Color Management Setting the presentation timer To cancel the timer, perform the following stepsSelection Description Top-Left Bottom-Left Top-Right Bottom-RightRemote paging operations Freezing the imageHiding the image Locking control keysAdjusting the sound Adjusting the sound levelTo activate the High Altitude Mode Operating in a high altitude environmentDirect power off Turning off the Power On/Off Ring ToneShutting down the projector Menu operation Menu systemMain menu Sub-menu Options BasicTime Sec Menu Settings Menu Position Right/Bottom-LeftReminder On/Off MessageAdvanced Description of each menu Picture Mode Temperature 3D ColorManagement Save Settings Display menu Picture menu Function DescriptionSystem Setup Basic menu Function Description Quick Auto TimerSettings SearchPanel Key LockBackground ScreenSystem Setup Advanced menu Function Description Reset AllBaud Rate Test PatternCurrent SystemStatus Maintenance Care of the projectorSetting Lamp Mode as Economic Lamp informationGetting to know the lamp hour Extending lamp lifeTiming of replacing the lamp Status MessageReplacing the lamp Use the handle to slowly pull the lamp out Projector Resetting the lamp timer Indicators Light Status & Description Power eventsLamp events OffTroubleshooting Specifications Projector specificationsDimensions Ceiling mount installationTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsTiming Vertical HorizontalWarranty and Copyright information Limited warrantyCopyright Disclaimer

MX503, MS502 specifications

BenQ MX503 and MS502 are exemplary projectors that cater to the educational and office sectors with their cutting-edge features and technologies. These models are designed to offer exceptional projection quality and ease of use, ensuring that presentations, lectures, and meetings are impactful and engaging.

The BenQ MX503 boasts a native XGA resolution of 1024 x 768 pixels, providing crystal-clear images that enhance visual presentations. With a remarkable brightness of 3,000 ANSI lumens, it ensures that visuals remain vibrant and visible even in well-lit environments. The contrast ratio of 13,000:1 allows for deeper blacks and brighter whites, ensuring a more dynamic range in color representation. The projector is equipped with the Super Eco Mode technology, which reduces power consumption significantly, extending the lamp life to up to 10,000 hours, promoting energy efficiency.

On the other hand, the BenQ MS502 features SVGA resolution of 800 x 600 pixels, making it a more economical option while still delivering quality imagery suitable for various presentations. With a brightness of 3,000 ANSI lumens, the MS502 also guarantees visibility in diverse lighting conditions. Its contrast ratio reaches 2000:1, offering solid color depth and clarity, ideal for educational settings.

Both projectors incorporate 3D display technology, allowing users to present 3D content seamlessly, enhancing the learning experience and audience engagement. The easy installation feature, along with vertical keystone correction, simplifies the setup process, accommodating various room layouts.

Connectivity is another highlight of the MX503 and MS502 projectors, as they come with multiple input options, including VGA, HDMI, and USB ports, facilitating easy connection with laptops, desktop computers, and other multimedia devices. The intuitive user interface further streamlines navigation and operation.

In summary, the BenQ MX503 and MS502 projectors offer valuable features, including high brightness, energy-efficient operation, versatile connectivity, and superior image quality. They cater specifically to the needs of educational institutions and professional environments, making them reliable choices for anyone looking to enhance their presentation delivery. With a focus on performance and user-friendliness, these projectors stand out in their category, meeting demanding visual presentation needs effectively.
Top Page Image Contents