BenQ CP220 user manual Connecting a Component Video source device, 1080i 50/ 60 Hz

Page 24

Connecting a Component Video source device

Examine your Video source device to determine if it has a set of unused Component Video output sockets available:

•If so, you can continue with this procedure.

•If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a Component Video source device:

1.Take the (optional accessory) Component Video to VGA (D-Sub) adaptor cable and connect the end with 3 RCA type connectors to the Component Video output sockets of the Video source device. Match the color of the plugs to the color of the sockets; green to green, blue to blue, and red to red.

2.Connect the other end of the Component Video to VGA (D-Sub) adaptor cable (with a D-Sub type connector) to the D-SUB/COMP IN socket on the projector.

3.If you wish to make use of the projector (mixed mono) speaker, take a suitable audio cable and connect one end of the cable to the audio output sockets of the video device, and the other end to the AUDIO socket of the projector.

Once connected, the audio can be controlled by the projector volume and mute settings. See "Mute" and "Volume" on page 35 for details.

The final connection path should be like that shown in the following diagram:

A/V device

Audio cable

Component Video to VGA (D-Sub) adaptor cable

•The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See "Connecting Audio" on page 17 for details.

•Component Video is the only video output that delivers native 16:9 aspect ratio picture.

If you connect the projector to a High Definition TV (HDTV) tuner, the following standards are supported:

•

480i

•

480p

•

576i

•

576p

•

720p (50/ 60 Hz)

•

1080i (50/ 60 Hz)

If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

18 Connection

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Welcome Copyright DisclaimerTable of contents Switching input signal Adjusting the projected image Iv Table of contentsTable of contents Supported timing for Component-YPbPr inputMemo Vi Table of contents Important safety instructions Safety Instructions Bedding or any other soft surface Safety Instructions Projector features IntroductionIntroduction Shipping contents Projector exterior view Front / upper sideRear side Lower/ Side viewPower indicator light See Indicators on page 42 for details Controls and functionsProjector Keystone / Left Keystone / RightRemote control Keystone SeeTurns the projector on or off Up, Down Left, RightRemote control effective range Replacing the remote control batteryOperating the projector from Front RearSafety instructions for ceiling mounting of the projector Positioning your projectorChoosing a location Floor frontObtaining a preferred projected image size Positioning your projector Maximum zoom Minimum zoom Screen Center of lens Projection distance1219 1500Connecting a computer or monitor Connecting a computerConnection ConnectionConnecting a monitor Connecting Video source devices Best video qualityConnecting a Component Video source device 1080i 50/ 60 HzConnecting an S-Video source device Settings. See Mute Off and Volume 5 on page 35 for detailsConnecting a composite Video source device Plug the power cord into the projector and into a wall OperationStart up OperationUtilizing the password function Setting a passwordIf you forget the password Switching input signal Entering the password recall procedureChanging the password Closing the password functionAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarityOptimizing the image Correcting keystoneSelecting an application mode PC Signal InputOther adjustments Adjusting brightnessOperating in a high altitude environment Current StatusHiding the image Remote paging operationsFreezing the image Personalizing the projector menu displayDisconnect the power cord from the wall socket Shutting down the projectorMenu operation Menu systemUsing the menus On the remote control to leaveSave the setting Right on the projector or Press Exit on the projectorPicture menu Pro-Picture menu Setting menu Advance menu Resolution Mode EquivalentInformation menu SourceMaintenance Care of the projectorLamp information Calculation of lamp hourReplacing the lamp Resetting the lamp counter Temperature information IndicatorsPower indicator light is flashing during powering up Projector is under normal operationProjector needs 90 seconds to cool down. Or Please contact your dealer for assistanceTroubleshooting Plug the power cord into the AC inlet onMake sure that it is switched on Lens cover is not open Slide open the lens coverSpecifications Projector specificationsTiming chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsDimensions Unit mm SpecificationsWarranty Limited WarrantyRegulation Statements FCC statementEEC statement MIC statement

CP220 specifications

The BenQ CP220 is a robust and reliable projector designed for educational and business environments. This model is renowned for its exceptional image quality, ensuring that presentations are both clear and engaging. Equipped with DLP (Digital Light Processing) technology, the CP220 utilizes a high-brightness lamp that provides vivid colors and sharp details. With a brightness rating of 2500 ANSI lumens, it excels in various lighting conditions, making it suitable for both small and large venues.

One of the standout features of the BenQ CP220 is its native XGA resolution of 1024x768 pixels, which allows for detailed display of text and images. This resolution is particularly beneficial for presenting high-definition content, ensuring that every detail is captured and displayed accurately. Additionally, the projector supports a range of resolutions and aspect ratios, making it versatile for differing media formats.

The CP220 is designed with user convenience in mind. It features quick and easy setup options, including automatic keystone correction, which ensures that images are perfectly aligned, regardless of the projector's angle. This feature is particularly useful in dynamic environments where quick adjustments are often needed. Furthermore, the projector offers a multitude of connectivity options, including VGA, USB, and HDMI ports, allowing users to connect a variety of devices seamlessly.

In terms of durability and maintenance, the BenQ CP220 boasts a long lamp life of up to 4,500 hours in economy mode. This means less frequent lamp replacements and lower overall operating costs, which is an important consideration for educational institutions and businesses looking to maximize their investments. The projector's efficient cooling system also helps to ensure longer operational periods without overheating.

Overall, the BenQ CP220 stands out for its combination of performance, versatility, and user-friendly features. Its high brightness, excellent resolution, and ease of use make it an ideal choice for any setting that demands reliable and high-quality projector performance. Whether for classroom instruction, corporate presentations, or multimedia displays, the CP220 is a dependable tool that enhances communication and engagement. With its advanced technologies and thoughtful design, the BenQ CP220 continues to be a favored choice among educators and professionals alike.
Top Page Image Contents