BenQ CP220 user manual Connecting an S-Video source device

Page 25

Connecting an S-Video source device

Examine your Video source device to determine if it has an unused S-Video output socket available:

•If so, you can continue with this procedure.

•If not, you will need to reassess which method you can use to connect to the device. To connect the projector to an S-Video source device:

1.Take the (optional accessory) S-Video cable and connect one end to the S-Video output socket of the Video source device.

2.Connect the other end of the S-Video cable to the S-VIDEO socket on the projector.

3.If you wish to make use of the projector (mixed mono) speaker, take a suitable audio cable and connect one end of the cable to the audio output sockets of the video device, and the other end to the AUDIO socket of the projector.

Once connected, the audio can be controlled by the projector volume and mute

settings. See "Mute (Off)" and "Volume (5)" on page 35 for details.

The final connection path should be like that shown in the following diagram:

A/V device

S-Video cable

Audio cable

•The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See "Connecting Audio" on page 17 for details.

•If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

•If you have already made a Component Video connection between the projector and this S-Video source device using Component Video connections, you need not connect to this device using an S-Video connection as this makes an unnecessary second connection of poorer picture quality. See "Connecting Video source devices" on page 17 for details.

Connection 19

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Welcome Disclaimer CopyrightTable of contents Iv Table of contents Switching input signal Adjusting the projected imageSupported timing for Component-YPbPr input Table of contentsMemo Vi Table of contents Important safety instructions Safety Instructions Bedding or any other soft surface Safety Instructions Introduction Projector featuresIntroduction Shipping contents Front / upper side Projector exterior viewRear side Lower/ Side viewControls and functions Power indicator light See Indicators on page 42 for detailsProjector Keystone / Left Keystone / RightKeystone See Remote controlTurns the projector on or off Up, Down Left, RightReplacing the remote control battery Remote control effective rangeOperating the projector from Front RearPositioning your projector Safety instructions for ceiling mounting of the projectorChoosing a location Floor frontObtaining a preferred projected image size Positioning your projector Screen Center of lens Projection distance Maximum zoom Minimum zoom1219 1500Connecting a computer Connecting a computer or monitorConnection ConnectionConnecting a monitor Best video quality Connecting Video source devices1080i 50/ 60 Hz Connecting a Component Video source deviceSettings. See Mute Off and Volume 5 on page 35 for details Connecting an S-Video source deviceConnecting a composite Video source device Operation Plug the power cord into the projector and into a wallStart up OperationSetting a password Utilizing the password functionIf you forget the password Entering the password recall procedure Switching input signalChanging the password Closing the password functionAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image size and clarityCorrecting keystone Optimizing the imagePC Signal Input Selecting an application modeAdjusting brightness Other adjustmentsCurrent Status Operating in a high altitude environmentRemote paging operations Hiding the imageFreezing the image Personalizing the projector menu displayShutting down the projector Disconnect the power cord from the wall socketMenu system Menu operationOn the remote control to leave Using the menusSave the setting Right on the projector or Press Exit on the projectorPicture menu Pro-Picture menu Setting menu Advance menu Mode Equivalent ResolutionInformation menu SourceCare of the projector MaintenanceCalculation of lamp hour Lamp informationReplacing the lamp Resetting the lamp counter Indicators Temperature informationPower indicator light is flashing during powering up Projector is under normal operationPlease contact your dealer for assistance Projector needs 90 seconds to cool down. OrPlug the power cord into the AC inlet on TroubleshootingMake sure that it is switched on Lens cover is not open Slide open the lens coverProjector specifications SpecificationsSupported timing for PC input Timing chartSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsUnit mm Specifications DimensionsLimited Warranty WarrantyFCC statement Regulation StatementsEEC statement MIC statement

CP220 specifications

The BenQ CP220 is a robust and reliable projector designed for educational and business environments. This model is renowned for its exceptional image quality, ensuring that presentations are both clear and engaging. Equipped with DLP (Digital Light Processing) technology, the CP220 utilizes a high-brightness lamp that provides vivid colors and sharp details. With a brightness rating of 2500 ANSI lumens, it excels in various lighting conditions, making it suitable for both small and large venues.

One of the standout features of the BenQ CP220 is its native XGA resolution of 1024x768 pixels, which allows for detailed display of text and images. This resolution is particularly beneficial for presenting high-definition content, ensuring that every detail is captured and displayed accurately. Additionally, the projector supports a range of resolutions and aspect ratios, making it versatile for differing media formats.

The CP220 is designed with user convenience in mind. It features quick and easy setup options, including automatic keystone correction, which ensures that images are perfectly aligned, regardless of the projector's angle. This feature is particularly useful in dynamic environments where quick adjustments are often needed. Furthermore, the projector offers a multitude of connectivity options, including VGA, USB, and HDMI ports, allowing users to connect a variety of devices seamlessly.

In terms of durability and maintenance, the BenQ CP220 boasts a long lamp life of up to 4,500 hours in economy mode. This means less frequent lamp replacements and lower overall operating costs, which is an important consideration for educational institutions and businesses looking to maximize their investments. The projector's efficient cooling system also helps to ensure longer operational periods without overheating.

Overall, the BenQ CP220 stands out for its combination of performance, versatility, and user-friendly features. Its high brightness, excellent resolution, and ease of use make it an ideal choice for any setting that demands reliable and high-quality projector performance. Whether for classroom instruction, corporate presentations, or multimedia displays, the CP220 is a dependable tool that enhances communication and engagement. With its advanced technologies and thoughtful design, the BenQ CP220 continues to be a favored choice among educators and professionals alike.
Top Page Image Contents