BenQ model gp1 user manual Connecting a USB Reader source device, USB flash disk

Page 19

Connecting a USB Reader source device

To connect the projector to a USB Reader source device:

1.Connect a USB Reader source device to the USB slot on the projector.

2.If you wish to make use of a speaker or other audio input equipment, take a suitable audio cable and connect one end to the audio input socket of the speaker, the other end to the AUDIO OUT socket of the projector. When the audio cable is connected to the AUDIO OUT terminal, the speaker output is muted.

The final connection path should be like that shown in the following diagram:

USB flash disk

• If the USB Reader main screen is not displayed after the projector is turned on. Press SOURCE on the projector or remote control and select USB Reader after a source selection bar displays. See "Presenting From a USB Reader" on page 41 for details.

•The AUDIO OUT socket on the projector supports USB Reader function only. Please see page 45 for the volume control when using AUDIO OUT.

Connection 19

Image 19

Contents Welcome Table of contents Do not look straight at the projector Important safety instructionsRefer servicing to qualified service Operate your projector. Save it forSafety Instructions Do not block the ventilation holes Safety Instructions Introduction Projector featuresShipping contents Rear/lower side Projector exterior viewControls and functions Projector PowerPower and Ring LED indicator Volume/Arrow keys /-, /+ Key LED indicatorReturn Remote controlKeystone/Arrow keys / Up Down SelectRemote control effective range Obtaining a preferred projected image size Positioning your projectorFeet Projection dimensionsConnection Connecting a computerTo connect the projector to a notebook or desktop computer Best video quality Connecting Video source devicesLeast video quality To connect the projector to a Component Video source device Connecting a Component Video source deviceTo connect the projector to a composite Video source device Connecting a composite Video source deviceUSB flash disk Connecting a USB Reader source deviceStarting up the projector OperationUse / to highlight the System Setup Basic menu Using the menusSetting a password Utilizing the password functionIf you forget the password Changing the password Entering the password recall procedureDisabling the password function Adjusting the projected image Switching input signalAdjusting the image height Fine-tuning the image clarity Auto-adjusting the imageCorrecting keystone Selecting the aspect ratio Magnifying and searching for detailsPicture modes for different types of signals Selecting a picture modeOptimizing the image Go to the Picture Picture Mode menu Setting the User modeFine-tuning the image quality in user modes Using Wall ColorFreezing the image Hiding the imageOperating in a high altitude environment Adjusting the soundAdjusting the sound level System Setup Advanced menu isShutting down the projector Personalizing the projector menu displaySimple menu system Projector menu operationBasic Complete menu systemAdvanced Description of each menu Reference Picture ModeTemperature Save Settings Picture menu3Quick Auto Auto PowerBlank Timer Sleep TimerAudio SettingsReset All Advanced menuCurrent FAQ-Image InstallationFeatures Service Information menuEntering USB Reader main screen Presenting From a USB ReaderPlaying back photos and movies PC-less presentations Using USB Reader menus Use / to highlight Custom Setup menu USB Reader menu system USB Reader menu operationEnter File Manager mode Setup menuManager mode Extension Detail USB Reader support formatMovie Audio Codec DetailSubtitle Care of the projector MaintenanceStatus / Problems LED indicators Ring Power Key IndicatorsTroubleshooting Projector specifications SpecificationsTiming chart DimensionsLimited warranty Warranty and Copyright informationFCC statement Regulation statementsRegulation statements