BenQ MX720 user manual Operation, Starting up the projector

Page 19

Operation

Starting up the projector

1.Plug the power cord into the projector and into a

power outlet. Turn on the power outlet switch (where fitted). Check that the POWER indicator light on the projector lights orange after power has been applied.

Please use the original accessories (e.g. power cord) only with the device to avoid possible dangers such as electric shock and fire.

2.Press POWER to start the projector. As soon as the lamp lights up, a "Power On Ring Tone" will be heard. The POWER indicator light flashes green and stays green when the projector is on.

The start up procedure takes about 30 seconds. In the later stage of start up, a startup logo is projected.

(If necessary) Rotate the focus ring to adjust the image clearness.

To turn off the ring tone, see "Turning off the Power On/Off Ring Tone" on page 34 for details.

If the projector is still hot from previous activity, it will run the cooling fan for approximately 90 seconds before energizing the lamp.

3.If the projector is activated for the first time, select your OSD language and follow the on-screen instructions to proceed.

4.If you are prompted for a password, press the arrow keys to enter a six-digit password. See "Utilizing the password function" on page 23 for details.

5.Switch all of the connected equipment on.

6.The projector will start to search for input signals. The current input signal being scanned displays in the upper left corner of the screen. If the projector doesn't detect a valid signal, the message “No Signal” will continue displaying until an input signal is found.

You can also press SOURCE on the projector or remote control to select your desired input signal. See "Switching input signal" on page 25 for details.

If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message “Out of Range” displayed on the background screen. Please change to an input signal which is compatible with the projector's resolution or set the input signal to a lower setting. See "Timing chart" on page 58 for details.

If no signal is detected for 3 minutes, the projector automatically enters Screensaver mode.

Operation 19

Image 19
Contents MX720/MW721 Digital Projector Table of contents Safety Instructions Important safety instructionsSafety Instructions 3000 m Feet Ceiling mounting the projector Introduction Projector featuresShipping contents Front/upper side Rear/lower side Projector exterior viewProjector Controls and functionsRemote control Replacing the remote control batteries Remote control effective rangeFront Ceiling Positioning your projectorChoosing a location Front TableMX720 Obtaining a preferred projected image sizeMW721 Connection ConnectionConnecting audio Connecting video source devicesPlaying sound through the projector Audio output port About the microphone inputStarting up the projector OperationFine-tuning the image clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageCorrecting keystone Below is the overview of the OSD menu Using the menusIf you forget the password Using a security cable lockUtilizing the password function Setting a passwordChanging the password Entering the password recall procedureDisabling the password function Changing Color Space Switching input signalSelecting the aspect ratio Magnifying and searching for detailsMX720 MW721 About the aspect ratioGo to the Picture Picture Mode menu Using Wall ColorSelecting a picture mode Setting the User 1/User 2 modeAdjusting Brilliant Color Fine-tuning the image quality in user modesSelecting a Color Temperature 3D Color Management Setting a preferred color temperatureResetting current or all picture modes Setting the presentation timerSelection Description Top-Left Bottom-Left Top-Right Bottom-Right To cancel the timer, perform the following stepsRemote paging operations Freezing the imageOperating in a high altitude environment To activate the High Altitude ModeHiding the image Locking control keysUsing the test pattern Adjusting the soundTurning off the Power On/Off Ring Tone To select Blackboard or Whiteboard Using the teaching templatesShutting down the projector Direct power offMenu system Menu operationMain menu Sub-menu Options Basic Main menu Sub-menu Options System Setup Advanced Operation Description of each menu Fine Tuning 3D Color Picture menu Function Description Picture ModeTemperature Color TemperatureSearch TimerInstallation SettingsReceiver System Setup Basic menu Function DescriptionOperation RemoteLamp System Setup Advanced menu Function Description HighAltitude AudioNetwork System Setup Advanced menu Function DescriptionReset All StandbySystem CurrentStatus Care of the projector MaintenanceGetting to know the lamp hour Lamp informationExtending lamp life Status Message Timing of replacing the lampReplacing the lamp Connect the power and restart the projector Resetting the lamp timer Thermal events IndicatorsLight Status & Description Power events Lamp eventsTroubleshooting Projector specifications SpecificationsCeiling mount installation DimensionsSupported timing for PC input Timing chartKHz Supported timing for Hdmi Hdcp input Supported timing for Video and S-Video inputs Supported timing for Component-YP bP r inputTiming Disclaimer Warranty and Copyright informationLimited warranty Copyright
Related manuals
Manual 61 pages 54.58 Kb

MX720 specifications

The BenQ MX720 and MW721 are two versatile projectors designed to meet the demands of educational and corporate environments, providing high performance and remarkable features that enhance presentations and classroom interactions.

Starting with the BenQ MX720, this projector boasts a maximum brightness of 4000 ANSI lumens, ensuring that images remain clear and vibrant even in well-lit rooms. Its native XGA (1024x768) resolution is complemented by a high contrast ratio of 13,000:1, which produces crisp images and detailed visuals. The MX720 employs DLP technology, known for its reliability and color accuracy, making it an ideal choice for presentations that require excellent image quality.

The MX720 also features a range of connectivity options, including HDMI, VGA, and USB ports, enabling users to easily connect various devices such as laptops, document cameras, and media players. With a 1.1x optical zoom lens, the projector allows flexible installation and easy adjustments to image size, ensuring that users can achieve the perfect projection for any setting.

On the other hand, the BenQ MW721 offers a higher resolution of WXGA (1280x800), making it suitable for displaying widescreen content. This projector also provides an impressive brightness level of 4000 ANSI lumens and a similar high contrast ratio of 13,000:1, ensuring excellent image quality across different lighting conditions. The DLP technology used in the MW721 contributes to sharp visuals and vibrant colors, making it a great option for movies, presentations, and detailed graphics.

Both projectors incorporate features like SmartEco technology, which adjusts lamp power dynamically to extend the lamp life while reducing energy consumption. This smart management prolongs the lifespan of the lamp to up to 10,000 hours, resulting in cost savings over time.

In addition, both models come equipped with 3D support, providing an immersive experience that can be leveraged for educational purposes or engaging presentations. The intuitive user interface of the projectors also simplifies setup and operation, allowing educators and professionals to focus more on their content and less on technology.

In summary, the BenQ MX720 and MW721 are powerful projectors that deliver exceptional image quality, versatility in connectivity, and advanced technologies. They cater to a wide range of environments, making them ideal tools for both education and professional presentations. Their combination of performance, reliability, and user-friendly features ensures that they meet the needs of modern users effectively.