BenQ MX812ST, MW811ST user manual Important safety instructions, Safety Instructions

Page 3

Important safety instructions

Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product.

Safety Instructions

1.Please read this manual before you operate your projector. Save it for future reference.

2.Do not look straight at the projector lens during operation. The intense light beam may damage your eyes.

3.Refer servicing to qualified service personnel.

5.In some countries, the line voltage is NOT stable. This projector is designed to operate safely within a mains voltage between 100 to 240 volts AC, but could fail if power cuts or surges of ±10 volts occur. In areas where the mains voltage may fluctuate or cut out, it is recommended that you connect your projector through a power stabilizer, surge protector or uninterruptible power supply (UPS).

6.Do not block the projection lens with any objects when the projector is under operation as this could cause the objects to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press BLANK on the projector or remote control.

4.Always open the lens shutter (if any) or remove the lens cap (if any) when the projector lamp is on.

Important safety instructions

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model Name MX713 ST/MW714 ST/MX762 ST Digital ProjectorTable of contents Important safety instructions Important safety instructionsSafety Instructions Refer servicing to qualified service personnelSafety Instructions Confined. Allow at least 50 cm clearance Locations near fire alarmsLocations with an ambient temperature Locations where the altitudes are higherDo not step on the projector or place InstalledIt from the power supplys power outlet ServicedProjector features IntroductionIntroduction Shipping contents Front/upper side Rear/lower side Projector exterior viewProjector Controls and functionsKeystone/Arrow buttons / Up Down Remote controlTest AutoNumeric buttons Operating the Laser pointerMute MIC/VOL +Remote control effective range Replacing the remote control batteriesApprox.+15º Front Ceiling Positioning your projectorChoosing a location Front TableObtaining a preferred projected image size Projection dimensionsMW714 ST Diagonal Height Width From screen Offset 12701107 623 150 3810 2286 3048 1905 1490 180 4572 2743 3658 1787 B1 aB2 a Distance150 3810 2019 3231 2032 1077 1723100 2540 1346 2154 120 3048 1615 2585Connection Best Connecting video source devicesConnecting audio Terminal name Terminal appearancePlaying sound through the projector About the microphone inputDevice Page Operation Starting up the projectorOperation Fine-tuning the image clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageCorrecting keystone Using the menus Following example describes how to set the OSD languageUse / to highlight the System Setup Basic menu Highlight Change Security Settings and press MODE/ENTER Using a security cable lockUtilizing the password function Setting a passwordWrite down the number and turn off your projector If you forget the passwordEntering the password recall procedure Changing the passwordDisabling the password function Changing Color Space MX762 ST only Switching input signalSelecting the aspect ratio Magnifying and searching for detailsScreen with a 169 aspect ratio Projectors native resolution in its Displayed in the centerAdjustments About the aspect ratioGo to the Picture Picture Mode menu Using Wall ColorSelecting a picture mode Setting the User 1/User 2 modeFine-tuning the image quality in user modes Range at 0, only pure red in the projected Press To highlight Saturation and adjust itsEvery adjustment made will reflect to 3D Color ManagementSelection Description Setting the presentation timerTo cancel the timer, perform the following steps Count Up Increases from 0 to the preset time Count DownHiding the image Utilizing FAQ functionRemote paging operations Freezing the imageOperating in a high altitude environment To activate the High Altitude ModeUsing the remote control Locking control keysTurning off the Power On/Off Ring Tone Adjusting the soundAdjusting the sound level Adjusting the microphone volumeIf you are in a non-DHCP environment Controlling the projector through a LAN environmentCable connection If you are in a Dhcp environmentHighlight Wireless LAN and press MODE/ENTER Wireless connectionControlling the projector remotely through a web browser Page Page Iii Operation Page Operation Page Downloading and installing Q Presenter Using Q PresenterDisplaying images through Q Presenter Operation Operation Presenting from a USB Reader Direct power off Once the cooling process finishes, a Power Off RingShutting down the projector Basic Menu operationMenu system Main menu Sub-menu OptionsAdvanced Advanced Network Description of each menu Display menu Picture menu Function Description Picture ModeTemperature Management Save SettingsSearch System Setup Basic menu Function Description Quick AutoTimer SettingsLock Settings Security DescriptionPanel Key BackgroundTest Pattern System Setup Advanced menu Function DescriptionReset All Baud RateStatus Features ServiceCurrent SystemCare of the projector MaintenanceGetting to know the lamp hour Setting Lamp Mode as EconomicSetting Auto Power Off Lamp informationStatus Message Timing of replacing the lampReplacing the lamp Page Connect the power and restart the projector Resetting the lamp timerTighten the screw that secures the lamp cover Thermal events IndicatorsLight Status & Description Power events Lamp eventsTroubleshooting Projector specifications SpecificationsCeiling Mount screw M4 x 8 Max L = 8 mm Unit mm DimensionsCeiling mount installation Mm W x 128 mm H x 252 mm D 290Supported timing for PC input Timing chartSupported timing for Hdmi Hdcp input-MX762 ST only Horizontal Supported timing for Component-YPbPrinputSupported timing for Video and S-Video inputs TimingDisclaimer Warranty and Copyright informationLimited warranty CopyrightWeee directive Regulation statementsFCC statement for United States users EEC statement for European users

MX812ST, MW811ST specifications

The BenQ MW811ST and MX812ST are two powerful projectors designed for education and business presentations, offering multiple features that enhance the viewing experience. Both models showcase BenQ's commitment to delivering exceptional image quality and user-friendly functionalities.

Starting with the MW811ST, this projector boasts a WXGA resolution of 1280x800 pixels, providing a widescreen aspect ratio perfect for displaying HD content. With a brightness of 3000 ANSI lumens, it ensures vibrant images even in well-lit environments. The short-throw capability of this model allows users to project large images from a short distance, making it ideal for smaller classrooms and meeting rooms. The lens produces a screen size of up to 100 inches from only a short distance of about 1.5 meters, maximizing space efficiency.

The MW811ST also features BenQ's exclusive SmartEco technology, which intelligently adjusts lamp power and brightness according to the content being displayed. This results in significant power savings and prolonged lamp life, reducing total cost of ownership. The projector provides lamp life of up to 6000 hours in eco mode, ensuring extended usage between replacements. Additionally, it supports 3D content, providing a more immersive experience for viewers.

On the other hand, the BenQ MX812ST is equipped with XGA resolution of 1024x768 pixels. It offers a similar brightness of 3200 ANSI lumens, delivering clear visuals in various lighting conditions. Like the MW811ST, the MX812ST features short-throw projection capabilities, making it suitable for tight environments where space is limited. The projector can display a large image from a short distance, emphasizing convenience and practicality.

The MX812ST also includes essential features such as the SmartEco technology for energy efficiency and extended lamp life. Both models seamlessly integrate with an array of devices, including laptops and streaming devices, ensuring versatile compatibility in various presentation settings. Additionally, the user-friendly interface and remote control simplify navigation for users, making the projector easy to operate.

In conclusion, the BenQ MW811ST and MX812ST projectors deliver outstanding image quality, flexibility, and convenience, making them excellent choices for educators and professionals. Their robust features, integrated technologies, and energy-efficient designs position them as reliable tools for delivering effective and engaging presentations.
Top Page Image Contents