BenQ W770ST user manual System Setup Basic menu

3D

3D Mode

This projector features a 3D function which enables you to enjoy the 3D movies, videos, and sporting events in a more realistic way by presenting the depth of the images. You need to wear a pair of 3D glasses to view the 3D images.

When the 3D Mode function is enabled:

•The brightness level of the projected image will decrease.

•The Preset Mode cannot be adjusted.

•The Keystone can only be adjusted within limited degrees.

3D Sync Invert

When you 3D image is distorted, you can enable this function to switch between the image for the left eye and the right eye for the more comfortable 3D viewing experience.

See "Watching 3D content" on page 37 for details.

System Setup : Basic menu

Function	Description
Language	Sets the language for the On-Screen Display (OSD) menus. See "Using the
	menus" on page 24 for details.
Background Color	Sets the background color for the projector. See "Personalizing the projector
	menu display" on page 39 for details.
Splash Screen	Allows you to select which logo screen will display during projector start-up.
	You can choose BenQ logo screen, Blue screen or Black screen.
Projector Position	The projector can be installed on a ceiling or behind a screen, or with one or
	more mirrors. See "Choosing a location" on page 13 for details.
Auto Off	Prevents unnecessary projection when no signal is detected for a long time. See
	"Setting Auto Off" on page 48 for details.
Sleep Timer	Sets the auto-shutdown timer. The timer can be set to a value between 30
	minutes and 3 hours.
	Menu Display Time
	Sets the length of time the OSD will remain active after your last key press.
Menu Settings	Menu Position
	Sets the On-Screen Display (OSD) menu position.
	Blank Reminder Message
	Sets whether the blank reminder message is displayed by the projector while
	the image is hidden.
Input Source	Selects an input source to be projected. See "Selecting an input source" on
	page 23 for details.
Source Rename	Renames the source to your desired name. See "Selecting an input source" on
	page 23 for details.
	Sets whether the projector searches automatically for input sources. If the
Auto Source Search	source scan is On, the projector will scan for input sources until it acquires a
	signal. If the function is not activated, the projector selects the last used input
	source.

44 Using the projector