BenQ MW512 user manual Connecting Video source devices, Connecting audio

Page 20

Connecting Video source devices

You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source device as described below:

Terminal

Terminal appearance

Reference

Picture quality

name

 

 

 

 

HDMI

"Connecting an

 

HDMI

 

HDMI source device"

Best

 

on page 21

 

 

 

 

COMPUTER

"Connecting a

 

 

Component Video

 

Component Video

 

Better

 

source device" on

 

 

 

 

 

page 22

 

 

S-VIDEO

"Connecting an S-

 

S-Video

 

Video/composite

Good

 

source device" on

 

 

 

 

VIDEO

page 23

 

 

 

 

Video

 

 

Normal

Connecting audio

The projector has one built-in mono speaker which is designed to provide basic audio functionality accompanying data presentations for business purposes only. It is not designed for, nor intended for stereo audio reproduction use as might be expected in home theater or home cinema applications. Any stereo audio input (if provided), is mixed into a common mono audio output through the projector speaker.

When you connect audio output signal from a video source device, please set the audio output in dual track to obtain an optimal sound effects.

If you have a separate sound system, you will most likely want to connect the audio output of your Video source device to that sound system, instead of to the mono audio projector. The audio connections illustrated on page 18 are provided for informational purposes only. You need not connect audio to the projector if there is an alternate sound system available, or if audio is not required.

20 Connection

Image 20
Contents Welcome MW512 Digital ProjectorTable of contents Important safety instructions Safety Instructions Do not block the ventilation holes Safety Instructions Projector features IntroductionShipping contents Projector exterior view Front/upper sideControls and functions ProjectorCeiling mounting the projector Remote control Up/DownTimer On Timer Setup Setting the presentation timer onPositioning your projector Choosing a locationObtaining a preferred projected image size Positioning your projector Projection dimensions Min. zoomConnection Connecting a computer or monitor Connecting a computerConnecting a monitor To connect the projector to a notebook or desktop computerConnecting Video source devices Connecting audioConnecting an Hdmi source device To connect the projector to an Hdmi source deviceConnecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video/composite source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarity Correcting keystoneUsing the menus Use / to highlight the System Setup Basic menuUsing a security cable lock Utilizing the password functionSetting a password If you forget the passwordDisabling the password function Entering the password recall procedureChanging the password Operation Switching input signal Changing Color SpaceMagnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Selecting a picture mode Setting the User 1/User 2 modeGo to the Picture Picture Mode menu Optimizing the imageUsing Wall Color Fine-tuning the image quality in user modesPress Mode/Enter and the 3D Color Management page displays About color temperatures3D Color Management Creating your own startup screen Setting the presentation timer To cancel the timer, perform the following stepsPresentation Timer Top-Left Bottom-Left Top-Right Bottom-RightHiding the image How to use the Timer On key?Remote paging operations To highlight the Information menu Utilizing FAQ functionFreezing the image Adjusting the sound Adjusting the sound levelTo activate the High Altitude Mode Operating in a high altitude environmentPersonalizing the projector menu display Shutting down the projectorMenu operation Menu systemSystem Setup Basic Setup AdvancedDescription of each menu 3D Sync InvertTeaching TemplatePicture Mode Picture menuReference ModeTemperature Save SettingsInput signal Picture menu Source menuPresentation Timer Menu SettingsSystem Setup Basic menu OperationRemote ReceiverSystem Setup Advanced menu QuickCooling High AltitudeReset All ClosedCaption StandbyFAQ-Image Installation Features ServiceInformation menu CurrentMaintenance Care of the projectorSetting Lamp mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Projector and b lifting it off Resetting the lamp timer Tighten the screws that secure the lampIndicators Power Temp LampTroubleshooting Specifications OpticalDimensions Ceiling mount installationCeiling mount screws Unit mmTiming chart Supported timing for PC inputSupported timing for Hdmi input Supported timing for Component-YPbPrinput Warranty and Copyright information Limited warrantyRegulation statements FCC statementRegulation statements

MW512 specifications

The BenQ MW512 is a versatile and feature-rich projector that caters to both educational and business environments. Designed to deliver high-quality images and user-friendly operation, the MW512 stands out as a reliable tool for presentations, lectures, and multimedia entertainment.

At the heart of the MW512 is its impressive resolution of 1280 x 800 pixels, which delivers crisp and vibrant images, ensuring that text is sharp and visuals are clear. This native WXGA resolution makes it an excellent choice for widescreen content, as it can easily accommodate 16:10 aspect ratios. With a brightness of 3200 ANSI lumens, the MW512 is equipped to perform well in various lighting conditions, from dimly lit rooms to more brightly illuminated spaces. This high brightness level ensures that presentations remain clear and impactful.

The BenQ MW512 employs advanced DLP technology, which enhances image quality through better color reproduction and enhanced contrast. The projector's 10,000:1 dynamic contrast ratio enables rich blacks and bright whites, creating a more dynamic viewing experience. Whether it's detailed graphics, charts, or videos, the MW512 showcases content with exceptional clarity.

Another notable feature of the MW512 is its extensive connectivity options. The projector is equipped with multiple input ports, including HDMI, VGA, and USB, enabling seamless integration with a variety of devices such as laptops, tablets, and DVD players. This flexibility makes it easy for users to switch between devices without the hassle of changing cables.

In addition to its technical prowess, the MW512 is designed with user convenience in mind. With a lightweight and compact design, transporting the projector is a breeze, making it ideal for those who require a mobile solution. Easy installation is facilitated by features such as vertical keystone correction, which helps to ensure that the projected image remains aligned regardless of projector placement.

Furthermore, the MW512 incorporates energy-efficient technologies, contributing to a longer lamp life of up to 10,000 hours. This not only reduces maintenance costs but also minimizes the environmental impact associated with frequent lamp replacements.

In summary, the BenQ MW512 is a powerful projector that combines exceptional image quality, versatility, and user-friendly features. Whether for business presentations, educational purposes, or home entertainment, the MW512 delivers a superior visual experience that is sure to impress.