BenQ SP920 user manual Positioning your projector, Choosing a location

English

Positioning your projector

Choosing a location

Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment.

Your projector is designed to be installed in one of four possible installation locations:

1.Front Table

Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability.

2.Front Ceiling

Select this location with the projector suspended upside-down from the ceiling in front of the screen.

Purchase the BenQ projector ceiling mount kit from your dealer to mount your projector on the ceiling.

*Set Front Ceiling after you turn the projector on.

3.Rear Table

Select this location with the projector placed near the floor behind the screen.

Note that a special rear projection screen is required. *Set Rear Table after you turn the projector on.

4.Rear Ceiling

Select this location with the projector suspended upside-down from the ceiling behind the screen.

Note that a special rear projection screen and the BenQ projector ceiling mount kit are required for this installation location.

*Set Rear Ceiling after you turn the projector on.

*To set the projector position:

1.Press MENU/EXIT on the projector or remote control and then press / until the SYSTEM SETUP: Basic menu is highlighted.

2.Press / to highlight Projector Position and press / until the correct position is selected.

SYSTEM SETUP: Basic

Presentation Timer
Language	English
Projector Position	Front Table
Auto Power Off	Disable
Blank Timer	Disable
Panel Key Lock	Off
Sleep Timer	Disable
Splash Screen	BenQ
My Screen
Analog RGB	MENU Exit

12 Positioning your projector