BenQ SP920 Connecting a DVI-D source device, To connect the projector to a DVI-D source device

Page 20

English

Connecting a DVI-D source device

The projector provides a DVI-Dinput socket that allows you to connect it to a DVI-D source device like a DVD player.

DVI-D format is used to directly carry a digital signal to a digital display without signal conversion. The pure digital connection provides faster and higher image quality than an analog connection, due to the nature of the digital format.

Examine your source device to determine if it has an unused DVI-D output socket available:

•If so, you can continue with this procedure.

•If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a DVI-D source device:

1.Take a DVI-D cable and connect one end to the DVI-D output socket of the DVI-D source device. Connect the other end of the cable to the DVI-Dsignal input socket on the projector.

2.If you wish to make use the projector (mixed mono) speakers, take a suitable audio cable and connect one end of the cable to the audio output sockets of the video device, and the other end to the AUDIO socket of the projector.

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 44 for details.

2

Audio

cable

1

DVI-D cable

• The projector is only capable of playing mixed

AV devicemono audio, even if a stereo audio input is connected. See "Connecting Audio" on page 18 for details.

• In the unlikely event that you connect the projector to a DVD player and the projected picture displays wrong colors, please change the color space to YUV. See "Changing Color Space" on page 27 for details.

• If no signal is detected after establishing the connection, turn off the Quick Auto Search function in the SOURCE menu. See "Switching input signal" on page 27 for details.

20 Connection

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Welcome SP920 Digital ProjectorTable of contents Important safety instructions With all windows rolled upCigarette smoke may contaminate optical 3000 m 10000 feetImportant safety instructions Ceiling mounting the projector Projector features IntroductionShipping contents Front/upper side Rear/lower side RGB signal output socketProjector exterior view Controls and functions ProjectorMode MuteRemote control effective range Making the remote control a wired controlOperating the Laser pointer Operating the projector from the frontPositioning your projector Choosing a locationObtaining a preferred projected image size Select your screen size Projection dimensions ZoomConnecting a computer or monitor Connecting a computerConnection To connect the projector to a notebook or desktop computerWith a VGA cable With a VGA to DVI-A cable Connecting a monitorTo connect the projector to a monitor Connecting Video source devices Connecting AudioBest video quality Better video qualityConnecting a Hdmi source device To connect the projector to a Hdmi source deviceConnecting a DVI-D source device To connect the projector to a DVI-D source deviceConnecting a Component Video source device To connect the projector to a Component Video source deviceWith a Component Video cable With a Component Video to VGA D-Sub adaptor cableConnecting an S-Video or a composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorUsing the On-Screen Display OSD menus Using a security cable lockUse / to highlight the System Setup Basic menu Securing the projectorUtilizing the password function Setting a passwordIf you forget the password To leave the OSD menu, press MENU/EXITEntering the password recall procedure Changing the passwordDisabling the password function Confirm the new password by re-entering the new passwordSwitching input signal Changing Color SpaceAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio About the aspect ratioUsing Wall Color Selecting a picture modePC input signals D-Sub/Comp. analog RGB and DVI-D DVI-D Optimizing the imageFine-tuning the image quality in user modes 3D Color Management Adjusting Brilliant ColorSelecting a color temperature Setting the presentation timer Repeat steps 3 to 6 for other color adjustmentsPress MENU/EXIT to exit and save the settings Follow these steps to utilize this functionTo cancel the timer, perform the following steps How to use the Timer ON/SHOW key?Using the remote control Using the OSD menuUtilizing FAQ function Possible solutions To exit the OSD menu, press MENU/EXITHiding the image Freezing the imagePress / or go to the System Setup Basic Panel Key Lock To activate the High Altitude ModeLocking control keys Operating in a high altitude environmentAdjusting the sound Adjusting the sound levelTurning off the Power on/off ring tone Creating your own startup screenSetting the lamp mode Personalizing the On-Screen Display OSD menusShutting down the projector Main menu Sub-menu Options On-Screen Display OSD MenusMenu structure Setup Basic AdvancedDescription of each menu Presentation Timer Auto Power OffBlank Timer Sleep TimerLamp Settings Security SettingsReset All Settings FAQ-Image InstallationLamp information MaintenanceCare of the projector Setting Lamp Mode as Dual-Reliable Setting Auto Power OffExtending lamp life Timing of replacing the lampReplacing the lamp Screwdriver Remove the lamp cover from the projectorResetting the corresponding lamp timer Go to the System Setup Advanced Lamp Settings menuRestart the projector Way into the projectorIndicators Troubleshooting Dimensions SpecificationsProjector specifications Timing chart Supported timing for Analog RGB inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsResolution Horizontal Vertical Pixel Frequency ModeSupported timing for DVI-D and Hdmi Hdcp input Frequency kHz Frequency Hz MHzOther information Regulation statementsEnglish
Related manuals
Manual 3 pages 29.32 Kb

SP920 specifications

The BenQ SP920 is a sophisticated projector designed for a variety of professional and educational applications. As a versatile option, it stands out due to its impressive imaging capabilities, robust connectivity features, and user-friendly operation, making it a reliable choice for presentations, lectures, and even home entertainment.

One of the key features of the BenQ SP920 is its remarkable brightness, boasting an output of 5,000 ANSI lumens. This powerful lumen rating ensures that images remain vivid and clear even in well-lit environments, making it ideal for large conference rooms or classrooms. The projector’s resolution is another highlight, with a native WUXGA resolution of 1920 x 1200 pixels. This high-definition quality supports detailed visuals, ensuring that text is legible and images are sharp, enhancing the overall viewing experience.

The SP920 employs advanced DLP technology, known for producing high contrast ratios and vibrant colors. The combination of 10,000:1 contrast ratio and BrilliantColor technology allows for a broader color spectrum and improved white balance. This results in stunning image quality, showcasing deep blacks and bright whites, as well as rich, color-accurate visuals suitable for a multitude of content types.

Connectivity is another area where the BenQ SP920 excels. It features multiple input options, including HDMI, VGA, and USB, allowing it to easily connect to various devices such as laptops, Blu-ray players, and gaming consoles. The built-in speaker enhances its convenience, providing decent audio quality without the need for additional external sound systems.

User-oriented features include a simple setup process with easy-to-navigate menus, making it accessible for individuals with varying levels of technical expertise. The projector supports vertical and horizontal keystone correction, enabling easy adjustments for an even and properly aligned image when projecting at angles.

In terms of longevity and maintenance, the BenQ SP920 is equipped with a lamp life of up to 4,000 hours in normal mode and an impressive 6,000 hours in Eco Mode. This extends the time between replacements, reducing operational costs in the long run.

Overall, the BenQ SP920 is an excellent choice for professionals and educators seeking a reliable, high-performance projector that delivers exceptional image quality and versatile functionality for various applications. Its combination of brightness, clarity, and connectivity options make it a valuable tool for any presentation setup.
Top Page Image Contents