BenQ SP920 Setting the presentation timer, Repeat steps 3 to 6 for other color adjustments

Page 34

English

Please refer to the illustration to the right for how the colors relate to each other.

For example, if you select Red and set its range at 0, only pure red in the projected picture will be selected. Increasing its range will include red close to yellow and red close to magenta.

5.Press to highlight Saturation and adjust its values to your preference by pressing / . Every adjustment made will reflect to the image immediately.

For example, if you select Red and set its value at 0, only the saturation of pure red will be affected.

6.Press to highlight Gain and adjust its values to your preference by pressing / . This will affect the contrast level of the selected primary color. Every adjustment made will be reflected to the image immediately.

7.Repeat steps 3 to 6 for other color adjustments.

8.Make sure you have carried out all of the desired adjustments.

9.Press MENU/EXIT to exit and save the settings.

REDYellow GREEN

MagentaCyan

BLUE

Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations.

The Presentation Timer is only available when the input signal is a PC or notebook with D-SUB/COMP. IN, DVI-D or HDMI terminal in use. It is not available when the input signal is a DVI-D or HDMI signal with HDCP format.

Follow these steps to utilize this function:

1.Press TIMER SETUP on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press ENTER to display the Presentation Timer page.

2.Highlight Timer Period and decide the time period by pressing

/ . The length of time can be set from 1 to 5 minutes in 1- minute increments and 5 to 240 minutes in 5-minute increments.

Presentation Timer

Timer Period

15

 

 

 

 

 

 

Timer Display

 

Always

 

Timer Position

 

Top-Left

Timer Counting Direction

Count Down

Timer Audible Reminder

 

 

Off

On

Off

 

 

 

MENU Back

If the timer is already on, the timer will restart whenever the Timer Period is reset.

3.Press to highlight Timer Display and choose if you want the timer to show up on the screen by pressing

/ .

Selection

Description

Always

Displays the timer on screen throughout the presentation time.

1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).

Never

Hides the timer throughout the presentation time.

4.

Press

to highlight Timer Position and set the timer position

5 min

5 min

 

by pressing

/ .

 

 

 

 

 

 

 

5 min

5 min

34 Operation

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Welcome SP920 Digital ProjectorTable of contents Cigarette smoke may contaminate optical Important safety instructionsWith all windows rolled up 3000 m 10000 feetImportant safety instructions Ceiling mounting the projector Projector features IntroductionShipping contents Projector exterior view RGB signal output socketFront/upper side Rear/lower side Controls and functions ProjectorMode MuteOperating the Laser pointer Remote control effective rangeMaking the remote control a wired control Operating the projector from the frontPositioning your projector Choosing a locationObtaining a preferred projected image size Select your screen size Projection dimensions ZoomConnection Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerTo connect the projector to a monitor Connecting a monitorWith a VGA cable With a VGA to DVI-A cable Best video quality Connecting Video source devicesConnecting Audio Better video qualityConnecting a Hdmi source device To connect the projector to a Hdmi source deviceConnecting a DVI-D source device To connect the projector to a DVI-D source deviceWith a Component Video cable Connecting a Component Video source deviceTo connect the projector to a Component Video source device With a Component Video to VGA D-Sub adaptor cableConnecting an S-Video or a composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorUse / to highlight the System Setup Basic menu Using the On-Screen Display OSD menusUsing a security cable lock Securing the projectorIf you forget the password Utilizing the password functionSetting a password To leave the OSD menu, press MENU/EXITDisabling the password function Entering the password recall procedureChanging the password Confirm the new password by re-entering the new passwordSwitching input signal Changing Color SpaceAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio About the aspect ratioPC input signals D-Sub/Comp. analog RGB and DVI-D DVI-D Using Wall ColorSelecting a picture mode Optimizing the imageFine-tuning the image quality in user modes Selecting a color temperature Adjusting Brilliant Color3D Color Management Press MENU/EXIT to exit and save the settings Setting the presentation timerRepeat steps 3 to 6 for other color adjustments Follow these steps to utilize this functionUsing the remote control To cancel the timer, perform the following stepsHow to use the Timer ON/SHOW key? Using the OSD menuHiding the image Utilizing FAQ functionPossible solutions To exit the OSD menu, press MENU/EXIT Freezing the imageLocking control keys Press / or go to the System Setup Basic Panel Key LockTo activate the High Altitude Mode Operating in a high altitude environmentTurning off the Power on/off ring tone Adjusting the soundAdjusting the sound level Creating your own startup screenSetting the lamp mode Personalizing the On-Screen Display OSD menusShutting down the projector Menu structure On-Screen Display OSD MenusMain menu Sub-menu Options Setup Basic AdvancedDescription of each menu Blank Timer Presentation TimerAuto Power Off Sleep TimerReset All Settings Lamp SettingsSecurity Settings FAQ-Image InstallationCare of the projector MaintenanceLamp information Extending lamp life Setting Lamp Mode as Dual-ReliableSetting Auto Power Off Timing of replacing the lampReplacing the lamp Screwdriver Remove the lamp cover from the projectorRestart the projector Resetting the corresponding lamp timerGo to the System Setup Advanced Lamp Settings menu Way into the projectorIndicators Troubleshooting Projector specifications SpecificationsDimensions Supported timing for Component-YPbPrinput Timing chartSupported timing for Analog RGB input Supported timing for Video and S-Video inputsSupported timing for DVI-D and Hdmi Hdcp input Resolution HorizontalVertical Pixel Frequency Mode Frequency kHz Frequency Hz MHzOther information Regulation statementsEnglish
Related manuals
Manual 3 pages 29.32 Kb

SP920 specifications

The BenQ SP920 is a sophisticated projector designed for a variety of professional and educational applications. As a versatile option, it stands out due to its impressive imaging capabilities, robust connectivity features, and user-friendly operation, making it a reliable choice for presentations, lectures, and even home entertainment.

One of the key features of the BenQ SP920 is its remarkable brightness, boasting an output of 5,000 ANSI lumens. This powerful lumen rating ensures that images remain vivid and clear even in well-lit environments, making it ideal for large conference rooms or classrooms. The projector’s resolution is another highlight, with a native WUXGA resolution of 1920 x 1200 pixels. This high-definition quality supports detailed visuals, ensuring that text is legible and images are sharp, enhancing the overall viewing experience.

The SP920 employs advanced DLP technology, known for producing high contrast ratios and vibrant colors. The combination of 10,000:1 contrast ratio and BrilliantColor technology allows for a broader color spectrum and improved white balance. This results in stunning image quality, showcasing deep blacks and bright whites, as well as rich, color-accurate visuals suitable for a multitude of content types.

Connectivity is another area where the BenQ SP920 excels. It features multiple input options, including HDMI, VGA, and USB, allowing it to easily connect to various devices such as laptops, Blu-ray players, and gaming consoles. The built-in speaker enhances its convenience, providing decent audio quality without the need for additional external sound systems.

User-oriented features include a simple setup process with easy-to-navigate menus, making it accessible for individuals with varying levels of technical expertise. The projector supports vertical and horizontal keystone correction, enabling easy adjustments for an even and properly aligned image when projecting at angles.

In terms of longevity and maintenance, the BenQ SP920 is equipped with a lamp life of up to 4,000 hours in normal mode and an impressive 6,000 hours in Eco Mode. This extends the time between replacements, reducing operational costs in the long run.

Overall, the BenQ SP920 is an excellent choice for professionals and educators seeking a reliable, high-performance projector that delivers exceptional image quality and versatile functionality for various applications. Its combination of brightness, clarity, and connectivity options make it a valuable tool for any presentation setup.
Top Page Image Contents