English
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
• Press MODE/ENTER on the projector repeatedly until your desired mode is selected.
•Go to the PICTURE: Basic > Picture Mode menu and press 
/ 
to select a desired mode.
The picture modes available for different types of signals are listed below.
1.Cinema mode: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the COMPUTER input for best viewing in a blackened (little light) environment.
2.Dynamic mode: Maximizes the brightness of the projected image. This mode is suitable for environments where
3.Standard mode (Default): Is appropriate for viewing colorful movies, video clips from digital cameras or DVs.
4.User 1/User 2/User 3 mode: Recalls the settings customized based on the current available picture modes. See "Setting the User 1/User 2/User 3 mode" on page 34 for details.
Setting the User 1/User 2/User 3 mode
There are three
1.Press MENU/EXIT to open the
2.Go to the PICTURE: Basic > Picture Mode menu.
3.Press 
/ 
to select User 1 to User 2/User 3.
4.Press 
to highlight Reference Mode.
This function is only available when User 1/User 2/User 3 mode is selected up in the Picture Mode
5.Press 
/ 
to select a picture mode that is closest to your need.
6.Press 
to select a 
/ 
. See
7.When all settings have been done, highlight Save Settings and press MODE/ENTER to store the settings.
8.The confirmation message 'Setting Saved' displays.
34 Operation