BenQ SP840 Muting the sound, Adjusting the sound level, Adjusting the Treble level, English

Page 42
Muting the sound

English

Muting the sound

To temporarily turn off the sound,

• Using the remote control

Press MUTE to temporarily turn off the sound. While the sound is off,

the screen will display Adjusting the sound level in the upper right corner of the screen.

To restore the sound, press MUTE again.

• Using the OSD menu

1. Press MENU/EXIT and then press Adjusting the Treble level / Adjusting the Bass level until the SYSTEM SETUP: Advanced menu is highlighted.

2. Press Turning off the Power on/off Ring Tone to highlight Audio Settings and press ENTER. The Audio Settings page displays.

3.Highlight Mute and press Manual background / Manual background to select On.

4.To restore the sound, repeat steps 1-3 and press Manual background / Manual background to select Off.

Adjusting the sound level

To adjust the sound level,

• Using the remote control

Press Manual background to select a desired sound level.

• Using the OSD menu

1. Press MENU/EXIT and then press Manual background / Manual background until the SYSTEM SETUP: Advanced menu is highlighted.

2. Press Manual background to highlight Audio Settings and press ENTER. The Audio Settings page displays.

3. Press Manual background to highlight Volume and press Manual background / Manual background to select a desired sound level.

Adjusting the Treble level

To adjust the treble level,

1.Press MENU/EXIT and then press Manual background / Manual background until the SYSTEM SETUP: Advanced menu is highlighted.

2.Press Manual background to highlight Audio Settings and press ENTER. The Audio Settings page displays.

3. Press Manual background to highlight Treble and press Manual background / Manual background to select a desired treble level.

Manual background If adjusting the treble level when Mute is on, the Mute function turns off automatically.

Adjusting the Bass level

To adjust the bass level,

1.Press MENU/EXIT and then press Manual background / Manual background until the SYSTEM SETUP: Advanced menu is highlighted.

2.Press Manual background to highlight Audio Settings and press ENTER. The Audio Settings page displays.

3.Press Manual background to highlight Bass and press Manual background / Manual background to select a desired bass level.

Manual background If adjusting the bass level when Mute is on, the Mute function turns off automatically.

Turning off the Power on/off Ring Tone

1.Repeat steps 1-2 above.

2.Press Manual background to highlight Power on/off ring tone and press Manual background / Manual background to select Off.

The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power on/off ring tone.

42 Operation

Image 42
Contents SP840 Digital Projector User Manual WelcomeWarranty and Copyright Table of contentsImportant safety EnglishImportant safety instructions Safety InstructionsSafety Instructions Continued 4 Important safety instructions12. Do not place this projector in any of the following environments Ceiling mounting the projector 6 Important safety instructionsProjector features IntroductionShipping contents Standard accessoriesOptional accessories Projector exterior view Front/upper sideControls and functions ProjectorSee Using the menus on page 26 for details Remote control Operating the LASER pointer See Auto-adjusting the image on page 30 for detailsSee Switching input signal on page 29 for details Remote control effective range Replacing the remote control batteryPositioning your projector Choosing a locationObtaining a preferred projected image size Positioning your projectorHow to determine the recommended screen size for a given distance 16 Positioning your projectordiagonal SP840 projection dimensions169 screen InchesConnections Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerConnecting a monitor To connect the projector to a monitorBest video quality Connecting Video source devicesConnecting Audio Better video qualityConnecting HDMI source devices To connect the projector to an HDMI source deviceConnecting Component Video source devices To connect the projector to a Component Video source deviceTo connect the projector to an Audio source device Connecting S-Video source devices To connect the projector to an S-Video source deviceS-Video Cable AV device Audio Cable Connecting Composite Video source devices To connect the projector to a composite Video source device24 Connections Operation Starting up the projectorSecuring the projector Using the menusUsing a security cable lock remote control to turn the OSD menu onUtilizing the password function Setting a passwordIf you forget the password Disabling the password function Entering the password recall procedureChanging the password password next time the projector is startedSwitching input signal Changing Color SpaceAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityCorrecting keystone Using Auto KeystoneKeystone function Magnifying and searching for details Selecting the aspect ratio32 Operation About the aspect ratio 4. Letter Box5. Real Setting the User 1/User 2/User 3 mode Optimizing the imageSelecting a picture mode Adjusting Contrast Fine-tuning the image quality in user modesAdjusting Brightness Adjusting ColorSelecting a Color Temperature Adjusting Clarity ControlSelecting a Color Temperature UserFine Tuning Selecting a Gamma SelectionAdjusting Brilliant Color Selecting a White Peaking3D Color Management 1. Go to the PICTURE Advanced menu and highlight 3D Color Management Selecting Color Space ConversionSelecting a Video Format 2. Press MODE/ENTER and the 3D Color Management page displaysRemote paging operations Selecting a Film ModeSelecting a 3D Comb Filter Setting the Sleep Timer Locking control keysHiding the image Operating in a high altitude environment Adjusting the soundFreezing the image INPUT SOUCERAdjusting the Bass level Adjusting the sound levelAdjusting the Treble level Turning off the Power on/off Ring ToneConfiguring the Lan Control Settings Controlling the projector through a Lan environmentIf you are in a DHCP environment Controlling the projector remotely through a web browser If you are in a non-DHCP environmentii. To switch input source, click on your desired signal Personalizing the projector menu display Shutting down the projectorMain menu Menu operationMenu system Sub-menuDisable/30 min/1 hr/2 hr/3 hr/4 hr/8 VolumePower on/off MuteEquivalent Lamp Hour Description of each menu for details Menu position Menu display time52 Operation Mute DESCRIPTION default setting/value default settingvalue Cleaning the projector case MaintenanceCleaning the lens Care of the projectorLamp information Setting Lamp mode as EconomicSetting Auto Power Off Getting to know the lamp hourStatus Timing of replacing the lampSee Setting Lamp mode as Economic on page MessageReplacing the lamp 58 Maintenance4. Loosen the screws that secure the lamp Resetting the lamp timer SETUP Advanced Lamp SettingsPower events IndicatorsPower LightThe password is incorrect TroubleshootingRemote control does not work The projector does not turn onSpecifications Projector specifications132.4 DimensionsCeiling Mount Installation 254325Timing chart Supported timing for COMPUTER inputSupported timing for Component-YPbPr input EnglishSupported timing for Video and S-Video inputs Supported timing for HDMI HDCP input68 Specifications Copyright Warranty and Copyright informationLimited warranty DisclaimerEEC statement Regulation statementsFCC statement WEEE directiveAccessibility Requirements for Rehabilitation Act of 1973, Section Regulation statements
Related manuals
Manual 71 pages 62.24 Kb