Acer Official Manual for Projectors: P1100 & P1303W Setup Guide

Page 39

29

Note: This screen capture function is limited by 4:3 aspect ratio only.

Note: For XGA models, to get best quality for you desired image, suggest end-user set PC resolution to 1024 x 768 before you use this function. Note: For SVGA models, to get best quality for you desired image, suggest end-user set PC resolution to 800 x 600 before you use this function. Note: For WXGA models, to get best quality for you desired image, suggest end-user set PC resolution to 1280 x 800 before you use this function.

User password

Press to setup or change the "User Password".

Press number keys to set your password on the remote control and press "MENU" to confirm.

Press to delete character.

Enter the password when you see "Confirm Password" displayed.

The password should be between 4 and 8 characters long.

If you select "Request password only after plugging power cord", the projector will prompt the user to enter the password every time the power cord is plugged.

If you select "Always request password while projector turns on", the user has to enter the password every time when the projector is turned on.

Administrator Password

The "Administrator Password" can be used in both the "Enter

Administrator Password" and "Enter Password" dialog boxes.

Press to change the "Administrator Password".

The factory default of "Administrator Password" is "1234".

If you forgot your administrator password, do the following to retrieve the administrator password:

An unique 6-digit "Universal Password" which is printed on the Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Administrator Password is.

If losing this security card and number, please contact with an Acer service center.

Lock User Startup Screen

Default Lock User Startup Screen is "OFF". If lock user startup screen is "ON", users cannot change startup screen anymore and avoid other users change that arbitrarily. Choose "OFF" to unlock startup screen.

VGA OUT (Standby)

Default is "Off". Choose "On" to enable VGA OUT connection.

 

 

 

 

Reset

Press the

button and choose "Yes" to return the

 

 

parameters on all menus to the factory default settings.

English

Image 39
Contents Page Page Turning the product off before cleaning Information for your safety and comfortUsing electrical power Product servicing Additional safety informationPage To protect your hearing, follow these instructions Disposal instructionsMercury advisory Lamps contain Mercury, Dispose ProperlyUsage notes PrecautionsContents Regulations and safety notices Introduction Product FeaturesPackage Overview Rear side Projector OverviewProjector Outlook Front / upper sideSee the contents in Turning the Projector On/Off section Temp Indicator LEDControl Panel Changes the active source # Icon Function DescriptionHide Remote Control LayoutRGB Getting Started Connecting the ProjectorTurning the Projector On/Off Turning on the ProjectorLens cap Turning the projector off To raise the image Adjusting the Projected ImageAdjusting the Height of Projected Image Elevator foot release button Tilt adjusting wheelP1100/P1200/P1203/P1206 series How to optimize image size and distanceTop P1303W series Maxscreensize88 x 97 x Height Image P1303W series English User Controls Installation menuAcer Empowering Technology Onscreen Display OSD Menus Using the OSD menusColor Tint ImageTo move the image left Correct 3D display DDD TriDef Media Player Trial Management SettingSecurity Lock User Startup Screen Audio TimerLanguage Troubleshooting Image Problems and SolutionsProblem Solution English English Condition Message Reminder OSD MessagesCondition Solution Problems with the ProjectorLED Messages LED & Alarm Definition ListingReplacing the Lamp Ceiling Mount Installation Attach the ceiling bracket to the ceiling rod 60.0 mm DLP SpecificationsBelow items are for P1203/P1206/P1303W series only VGA Analog Compatibility modesHdmi Digital PowerBook G4 119.85 77.2064.00 31.25 120Hz for 3D mode only27.00 59.94 31.47 576iOperation conditions FCC noticeRemarque à lintention des utilisateurs canadiens Declaration of Conformity for EU countriesRadio device regulatory notice General List of applicable countries Declaration of Conformity Oct Federal Communications Commission Declaration of Conformity
Related manuals
Manual 75 pages 5.75 Kb