Acer T111B, N243, S5201M, PN-SX12, PS-X11M manual Management

Page 41

31

Note 5: Other notes about using the pen

1.Avoid standing too far from the screen. The closer you are to the screen, the better performance the pen has.

2.Hold the pen the way you hold a remote control or a pen.

3.A full battery charge takes 6-8 hours and will allow 20-40 hours non-stop use. The battery is only rechargeable, and is not user serviceable or user replaceable.

4.Avoid shadows! The pen cannot work if its tip is in a shadow or it is pointing at a shadow.

Management

English

ECO Mode

Choose "On" to dim the projector lamp, which will also

lower the power consumption, reduce noise, and extend

 

the lamp life. Choose "Off" to return to the normal mode.

 

 

 

Choose "On" to turn on the High Altitude mode. When

High Altitude

this function is turned on, the projector fans operate at full

speed continuously to cool down the projector’s

 

 

temperature.

 

 

Auto Shutdown

The projector will automatically shut down while there is

(Minutes)

no signal input detected after the setting time.

 

 

Lamp Hour Elapse

Displays the lamp’s elapsed operating time (in hours).

 

 

 

Choose this function to show or hide warning message

Lamp Reminding

when the changing lamp message is displayed. The

 

message will show up 30 hours before end of life.

 

 

 

Lamp Hour Reset

Press

after choosing "Yes" to turn the lamp hour

 

counter to 0 hours.

 

 

Auto Screen

The default value is "On". The up/down move of your

electronic screen relates to power on/off of the projector.

 

 

 

 

Image 41
Contents Page Page Information for Your Safety and Comfort Using electrical power Product servicing Page Sustainability/sustainability01.htm To protect your hearing, follow these instructionsFirst Thing First Contents Regulations and safety notices Introduction Product FeaturesPackage Overview Projector Overview Power key and Power indicator Control panelP5403/N243/PN-SX12S5201M/T111B/PS-X11M S5201M/T111B/PS-X11M P5403/N243/PN-SX12Function Function Description Connector supports YPbPr To change source to VGA. This connector supportsHDMI/DVI connector For computer mode only. Use the button to selectGetting Started Connecting the ProjectorEnglish S5201M/T111B/PS-X11MTurning On the Projector Turning the Projector On/OffTurning Off the Projector Adjusting the Height of the Projected Image Adjusting the Projected ImageHow to Optimize Image Size and Distance Desired Minimum Screen Size Min zoom Desired Image Size Distance m Top cm Diagonal inch Desired Image size User Controls Installation MenuAcer Empowering Technology Onscreen Display OSD Menus Using the OSD menusColor Color G Color RColor B SaturationImage Horizontal PositionVertical FrequencyStartup Screen SettingMenu Location English Security Timeout MinUser Password Devices Administrator PasswordLock User Startup Screen Reset Setting Moving Key For S5201MPen Function Link ChannelLAN Reset LAN SettingFor P5403 N243/PN-SX12LAN IP/Mask Identify IP and Mask address For S5201M LAN Reset Reset LAN function For S5201MAbout Interactive Pen Setting Management Audio VolumeLanguage TimerAppendices Problem SolutionEnglish Condition Solution Problems with the ProjectorCondition Message Reminder OSD MessagesLED & Alarm Definition Listing Replacing the Lamp Ceiling Mount Installation Attach the ceiling bracket to the ceiling rod Adjust the angle and positioning as necessary Specifications Below items are for P5403/N243/PN-SX12 only Below items are for S5201M/T111B/PS-X11M onlyMac G4 Mode Resolution Frequency Hz Frequency KHz59.870 47.776 1024 x 768@75Hz 75.020 60.24174.893 60.289 84.837 68.63372.000 84.99075.025 79.976 85.024Video mode Frequency Hz Frequency KHz Mode Resolution1080p 67.5 1080P 1080p 23.98Regulations and safety notices Remarque à lintention des utilisateurs canadiens List of applicable countries Declaration of Conformity Article 3.1b EMC -. EN301 Federal Communications Commission Declaration of Conformity