Management Setting
15
English
Menu Location | Choose the Menu location on the display screen | ||
|
| ||
Source Lock | When source lock is turned "Off", the projector will search for | ||
| other signals if the current input signal is lost. When source lock is | ||
| turned "On", it will “Lock” the current source channel unless you | ||
| press “SOURCE” button for next channel. | ||
|
| ||
High Altitude | Use this function to allow the fans operates at full speed | ||
| continuously to achieve proper high altitude cooling of the | ||
| projector. |
| |
|
| ||
Auto Shutdown | The projector will auto shutdown while there is no signal input | ||
(Minutes) | after the allocated time. (in minutes) | ||
|
|
|
|
LED Calibration | • | Press | after choosing "Yes", please wait for 10 seconds to |
| |||
|
| finish the white color fine tune process. (This function can be | |
|
| used after 30 minutes turning on.) It helps to adjust LED color | |
|
| performance. | |
|
|
|
|
Reset | • | Press | after choosing "Yes" to return the parameters on |
| |||
all menus to the factory default settings.
Language Setting
Language | to select |
Choose the multilingual OSD menu . Use | |
your preferred menu language. |
|
•Press 
to confirm the selection.