Acer H5360 manual Using electrical power

Page 4

iv

To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

Image 4 Contents
Acer Projector H5360 Series Users Guide Page Information for your safety and comfort Turning the product off before cleaningUsing electrical power Additional safety information Product servicingPage Operating environment for using wireless function Optional Medical devicesVehicles Potentially explosive environmentsMercury advisory Disposal instructionsLamps contain Mercury, Dispose Properly Precautions Usage NotesContents Regulations and safety notices Product Features IntroductionPackage Overview Front / upper side Projector OverviewRear side Remote Control and Control Panel Layout Remote Control Placement Connecting the Projector Getting StartedTurning the Projector On/Off Lens capTurning off the Projector Tilt adjusting wheel Adjusting the Projected ImageTo raise/lower the image Max screen size Top Height English Installation menu User ControlsAcer Empowering Technology Empowering KeyAcer eTimer Management Acer ePower ManagementUsing the OSD menus Onscreen Display OSD MenusColor Saturation ImageTint Nvidia URL DDD TriDef Media Player Trial Setting SecurityEnglish Management AudioTimer LanguageImage Problems and Solutions TroubleshootingProblem Solution English Problems with the Projector Condition SolutionOSD Messages Condition Message ReminderLED & Alarm Definition Listing LED MessagesReplacing the Lamp Ceiling Mount Installation Attach the ceiling bracket to the ceiling rod 82.30 mm 95.00 mm 15.00 mm Specifications DLPEnglish Compatibility modes VGA Analog119.858 480i27.00 480p56.48 60.02119.804 98.80 77.1067.50 1080p 30-100kHzFCC notice Operation conditionsDeclaration of Conformity for EU countries Remarque à lintention des utilisateurs canadiensRadio device regulatory notice General European Union EU List of applicable countriesFederal Communications Commission Declaration of Conformity Lead Polybrominated Biphenyls PBB’s Mercury Article 3.1b EMC