Barco R9002031 Raster Centering, Level until the raster becomes visible behind the image

Page 32

Installation adjustment mode

Raster Centering

The raster must be centered on the CRT faceplate of each tube,

therefore, it is necessary to look into the lenses.

5$67(5

&(17(5,1*

Caution : To avoid eye discomfort while performing these adjust-

CONTRAST

LEVEL IS REDUCED

ments, reduce the contrast and gradually increase the brightness

AND BRIGHTNESS INCREASED

TO MAKE THE RASTER

level until the raster becomes visible behind the image.

VISIBLE ON THE FACE PLATE

OF EACH CRT.

USE THE ARROW KEYS

TO CENTER THE RASTER

Warning : In order to ensure maximum CRT

ON THE GREEN, RED AND

BLUE CRT RESPECTIVELY

longevity and to avoid CRT damage, do not shift

<ENTER> to continue

<EXIT> to return

the raster outside the phosphor area of the CRT.

Press the <ENTER> key to display the raster on the green CRT.

Forbidden area

Projected raster

Look into the green lens and shift the raster with the control stick until

it is centered in the middle of the CRT faceplate.

Press the <ENTER> key to activate the raster on the Red CRT

CRT faceplate border

faceplate.

Shift the Red raster with the control stick until the raster is centered

Phosphor area

on the CRT faceplate.

Press the <ENTER> key to activate the raster on the Blue CRT

faceplate.

Shift the Blue raster with the joy stick until the raster is centered on the

CRT faceplate.

Press the <ENTER> key to continue with the CRT projection angle

Correct raster position

adjustment.

Press the <EXIT> key to return to Optical focusing.

Press the <ADJUST> key to return to Operational mode.

Wrong raster position

5975607 BARCODATA 808s 120397		8-5

Image 32

Contents Installation Manual Barco Projection Systems Barco nv/Projection Systems Noordlaan Kuurne Belgium Safety Instructions Installation Adjustment Mode Safety Instructions On safetyGeneral safety instructions OWNER’SRECORDOn installation On cleaningOn servicing On repackingUnpacking Unpacking and Projector DimensionsContents of the shipping carton Projector dimensions in mm Installation Guidelines Where to install the projector ? Mounting ConfigurationInstallation Setup Access to ControlsReinstalling the top cover Opening the top coverGetting access to the scan switches Scan Adaptation$57$% Servicemode Projector Setup Setting the projector addressPowerup mode Operational modeStandby mode OFF onPassword mode Baud Rate for communication with a computerProjector setup AC Power Connection AC Power mains cord connectionPreparing your power cord Mains lead power cord with CEE7 plugFuses AC Power checkAC Input power mains voltage adaptation Switching on the projector Starting up with a full white imageOnoff OFFAC power connection Signal input connection Connecting a Composite Video source to PortTermination Switch for Video Source ConnectionsConnecting a S-Video or Composite Video source to Port Connecting a RGB Analog source to PortTermination Switch for S-video RED Green BlueConnecting a RGB Analog source to Port 4/5 Connecting a Component Video source to Port 4/5RCVDS05 Connecting a VS05 source selector to Barcographics 808sPeripheral equipment Installation Adjustment Mode Before starting any adjustmentAdaptation procedure Access to Installation Adjustment Mode Overview flowchart of the Installation Adjustment ModeOptical Lens Focusing Projector DistanceRaster Centering Level until the raster becomes visible behind the imageCRT Projection Angle Adjustment CRT Installation adjustment mode Projector Address MESSAGES, Warnings and Failure CodesSource Iris FailureWait Barco Ceiling Mount Support Exploded view of Barco ceiling mount supportWater-level adjustment Projector axis adjustment Projector position correctionsG2 Adjustment $-867017Appendix B G2 adjustment Gamma Corrections Gamma CorrectionsTo carry out the Red and Blue Midlights Correction Federal Stock Number FSN Gross Weight LBS Emergency Phone noChemical Name and Synonyms Trade Name and Synonyms Chemical Family FormulaPrecautions to be Taken in Handling and Storing Other PrecautionsTreshold Limit Value Waste Disposal Method Spill

R9002038, R9002031 specifications

Barco is a renowned name in the field of visualization and display technology, consistently pushing the boundaries of what is possible in the realm of projection systems. Two prominent models from their product line are the Barco R9002031 and R9002038, which are celebrated for their exceptional performance and innovative features.

The Barco R9002031 is primarily designed for high-performance applications, making it an ideal choice for command and control rooms, simulation, and training environments. One of its standout features is the advanced DLP technology, which delivers exceptional brightness and contrast, resulting in vibrant images that maintain clarity even in well-lit conditions. The projector boasts a resolution of 1920x1200, which ensures that every detail is rendered with precision.

In addition to superior image quality, the R9002031 supports a variety of input sources, facilitating seamless integration into existing setups. Its flexible connectivity options, including HDMI and DisplayPort, enhance its versatility, allowing users to connect different devices without hassle. Furthermore, its compact design is optimized for space efficiency, making it suitable for various installation environments.

On the other hand, the Barco R9002038 takes things a step further with its impressive brightness and advanced color processing technologies. With a higher lumen output, this model is perfect for larger venues where visibility is a concern. The R9002038 is equipped with Barco’s proprietary color management system, which ensures accurate color reproduction, providing images that are true to life.

Another characteristic feature of both models is their durability and reliability. Barco systems are known for their long operational life, significantly reducing maintenance costs. The built-in cooling systems allow for extended use without overheating, providing peace of mind during critical operations.

In terms of user experience, both the R9002031 and R9002038 offer intuitive interfaces and remote management capabilities. Users can easily adjust settings and monitor performance, enhancing operational efficiency.

In summary, the Barco R9002031 and R9002038 models exemplify cutting-edge technology and design, making them suitable for a wide range of professional applications. Their impressive features, advanced imaging technologies, and robust reliability set them apart in the competitive landscape of visualization systems, ensuring that Barco remains a leader in the industry.