Barco R9002031 Safety Instructions, On safety, General safety instructions, Owner’Srecord

Safety instructions

1SAFETY INSTRUCTIONS

Projectors are built in accordance with the requirements of the international safety standards IEC950, UL 1950 and CSA C22.2 No. 950, which are the safety standards of information technology equipment including electrical business equipment.

These safety standards impose important requirements on the use of safety critical components, materials and isolation, in order to protect the user or operator against the risk of electric shock and energy hazard, and having access to live parts.

Safety standards also impose to the internal and external tempera- ture variations, radiation levels, mechanical stability and strength, enclosure construction and protection against risk of fire.

Simulated single fault condition testing ensures the safety of the equipment to the user even when the equipment's normal operation fails.

Warning :

To prevent fire or electrical shock hazard,

do not expose this projector to rain or moisture

Federal Communication Commission (FCC statement)

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Installation instructions

Before operating your projector please read this manual thoroughly, and retain it for future reference.

Installation and preliminary adjustments should be performed by qualified BARCO personnel or authorized BARCO service dealers.

OWNER’SRECORD

The article number (Art. No.) and serial number (Ser. No) are located at the rear of the projector. Copy these numbers in the spaces provided below. Refer to them whenever you call upon your BARCO dealer regarding this product.

Article number :

Serial number :

Dealer:

The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside

this product risk electrical shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and/or servicing instructions are included in the technical documentation for this equipment.

Instructions to the user :

If this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following measures :

*Re-orientate the receiving antenna for the radio or television.

*Relocate the equipment with respect to the receiver.

*Plug the equipment into a different outlet so that the equipment and receiver are on different branch circuits.

*Fasten cable connectors to the equipment with mounting screws.

Note :

The use of shielded cables is required to comply within the limits of Part 15 of FCC rules and EN55022.

General safety instructions :

*All the safety and operating instructions should be read before using this unit.

*The operating instruction manual should be retained for future reference.

*All warnings on the projector and in the documentation manuals should be adhered to.

*All instructions for operating and use of this equipment must be followed precisely.

On safety

*This product should be operated from an AC power source.

*This projector may be connected to an IT power system.

*Operating AC power voltage of the projector when leaving the factory:

BARCODATA 808s

Art. No.: R9002031 (230 VAC) Art. No.: R9002038 (120 VAC)

Consult the appropriate section of this manual to switch over from 230 Vac to 120 Vac or from 120 Vac to 230 Vac.

If you are not sure of the type of AC power available, consult your dealer or local power company.

*This product is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete

5975607 BARCODATA 808s 110397 1-1