Barco R9002038 Peripheral equipment, Connecting a VS05 source selector to Barcographics 808s

Page 27

Source connections

Connecting a RGB Analog source with Tri- level sync to Port 4/5 (option)

RGB analog input terminals with Tri-level sync input or with Tri-level sync on green can be connected to the projector via Port 4/5. The projector detects automatically where the sync signal is located. This feature requires an optional Tri-Level Sync Module - Order Number R9828040.

To select the input :

Press the numeric button 7 on the RCU or the local keypad.

Connecting a Component Video source with Tri-level sync to Port 4/5 (option)

Component video inputs with Tri-level sync signal can be connected to the projector via Port 4/5. The projector detects automatically where the sync signal is located. This feature requires an optional Tri- Level Sync Module - Order Number R9828040.

To select the input :

Press the numeric button 8 on the RCU or the local keypad.

Peripheral equipment

Connecting a RCVDS 05 source selector to the BARCOGRAPHICS 808s

•Up to 20 inputs with a RCVDS05 and up to 90 inputs can be

accommodated when multiple RCVDS source selectors are linked via a Expansion Module.

•Serial communication with the projector.

•Remote control buttons on the RCVDS05 to control the BARCO GRAPHICS 808s (source selection and analog settings).

•The selected source number will be displayed on a 2-digit display

and the selected input modules will be indicated with a LED on the rear.

The order numbers for the RCVDS05 source selector :

RCVDS05

230 V

R9827880

RCVDS05

120 V

R9827889

For more information about the use of the RCVDS05, consult the RCVDS05 Owner's Manual - order number : R5975765.

Connecting a VS05 source selector to the

BARCOGRAPHICS 808s

The VS05 can switch up to 5 Composite Video sources, 3 S-Video Sources and 1 RGB analog or component Video source to the BARCOGRAPHICS 808s. In addition, the audio signal associated with the source, can be switched to an audio amplifier.

VS05 order number : R9827890.

For more information about the use of the VS05, consult the VS05 Owner's Manual - order number : R5975245.

Connecting an IR Remote Receiver 800 to the BARCOGRAPHICS 808s

This infrared Remote Receiver makes it possible to control the BARCOGRAPHICS 808s from another room. There is a communica- tion cable between the IR Remote Receiver and the projector. The control information from the RCU can now be sent to the IR Remote Receiver 800. The IR Remote Receiver 800 displays the selected source on a 7-segment display.

IR Remote Receiver 800 order number : R9827515.

7-4

POWER / MAIN S

COMM. POR T

POR T 3

POR T 4/5

PORT 2

PORT 1

PR OJECTOR MODE

798

POWER / MAIN S

COMM. POR T

POR T 3

POR T 4/5

PORT 2

PORT 1

PR OJECTOR MODE

798

5975607 BARCODATA 808s 170397

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Installation Manual Barco Projection Systems Barco nv/Projection Systems Noordlaan Kuurne Belgium Safety Instructions Installation Adjustment Mode OWNER’SRECORD Safety InstructionsOn safety General safety instructionsOn repacking On installationOn cleaning On servicingUnpacking and Projector Dimensions Contents of the shipping cartonUnpacking Projector dimensions in mm Installation Guidelines Mounting Configuration Where to install the projector ?Opening the top cover Installation SetupAccess to Controls Reinstalling the top coverScan Adaptation Getting access to the scan switches$57$% Servicemode Setting the projector address Projector SetupOFF on Powerup modeOperational mode Standby modeBaud Rate for communication with a computer Password modeProjector setup Mains lead power cord with CEE7 plug AC Power ConnectionAC Power mains cord connection Preparing your power cordAC Power check AC Input power mains voltage adaptationFuses OFF Switching on the projectorStarting up with a full white image OnoffAC power connection Source Connections Signal input connectionConnecting a Composite Video source to Port Termination Switch for VideoRED Green Blue Connecting a S-Video or Composite Video source to PortConnecting a RGB Analog source to Port Termination Switch for S-videoConnecting a Component Video source to Port 4/5 Connecting a RGB Analog source to Port 4/5Connecting a VS05 source selector to Barcographics 808s Peripheral equipmentRCVDS05 Before starting any adjustment Installation Adjustment ModeAdaptation procedure Overview flowchart of the Installation Adjustment Mode Access to Installation Adjustment ModeProjector Distance Optical Lens FocusingLevel until the raster becomes visible behind the image Raster CenteringCRT Projection Angle Adjustment CRT Installation adjustment mode MESSAGES, Warnings and Failure Codes SourceProjector Address Failure WaitIris Exploded view of Barco ceiling mount support Barco Ceiling Mount SupportProjector position corrections Water-level adjustment Projector axis adjustment$-867017 G2 AdjustmentAppendix B G2 adjustment Gamma Corrections Gamma CorrectionsTo carry out the Red and Blue Midlights Correction Chemical Family Formula Federal Stock Number FSN Gross Weight LBSEmergency Phone no Chemical Name and Synonyms Trade Name and SynonymsWaste Disposal Method Spill Precautions to be Taken in Handling and StoringOther Precautions Treshold Limit Value

R9002038, R9002031 specifications

Barco is a renowned name in the field of visualization and display technology, consistently pushing the boundaries of what is possible in the realm of projection systems. Two prominent models from their product line are the Barco R9002031 and R9002038, which are celebrated for their exceptional performance and innovative features.

The Barco R9002031 is primarily designed for high-performance applications, making it an ideal choice for command and control rooms, simulation, and training environments. One of its standout features is the advanced DLP technology, which delivers exceptional brightness and contrast, resulting in vibrant images that maintain clarity even in well-lit conditions. The projector boasts a resolution of 1920x1200, which ensures that every detail is rendered with precision.

In addition to superior image quality, the R9002031 supports a variety of input sources, facilitating seamless integration into existing setups. Its flexible connectivity options, including HDMI and DisplayPort, enhance its versatility, allowing users to connect different devices without hassle. Furthermore, its compact design is optimized for space efficiency, making it suitable for various installation environments.

On the other hand, the Barco R9002038 takes things a step further with its impressive brightness and advanced color processing technologies. With a higher lumen output, this model is perfect for larger venues where visibility is a concern. The R9002038 is equipped with Barco’s proprietary color management system, which ensures accurate color reproduction, providing images that are true to life.

Another characteristic feature of both models is their durability and reliability. Barco systems are known for their long operational life, significantly reducing maintenance costs. The built-in cooling systems allow for extended use without overheating, providing peace of mind during critical operations.

In terms of user experience, both the R9002031 and R9002038 offer intuitive interfaces and remote management capabilities. Users can easily adjust settings and monitor performance, enhancing operational efficiency.

In summary, the Barco R9002031 and R9002038 models exemplify cutting-edge technology and design, making them suitable for a wide range of professional applications. Their impressive features, advanced imaging technologies, and robust reliability set them apart in the competitive landscape of visualization systems, ensuring that Barco remains a leader in the industry.
Top Page Image Contents