Acer X1230S manual Using electrical power

Page 4

iv

To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

Image 4
Contents Acer Projector X1130/X1230/X1230S Series Users Guide Page Information for Your Safety and Comfort Turning the product off before cleaningUsing electrical power Additional safety information Product servicingPage Operating environment for using wireless function Optional Medical devicesVehicles Potentially explosive environmentsDisposal instructions Mercury advisory Precautions Usage NotesContents Regulations and safety notices Product Features IntroductionPackage Overview Projector Outlook Projector OverviewDescription Control Panel Function DescriptionRemote Control Layout VGAFreeze Connecting the Projector Getting StartedTurning the Projector On/Off Turning On the ProjectorProjector Overheated. Lamp will automatically turn off soon Turning Off the ProjectorFan fail. Lamp will automatically turn off soon Adjusting the Projected Image Adjusting the Height of Projected ImageHow to Optimize Image Size and Distance 164 Desired Image Size Distance m Top cm Diagonal inch Desired Image size Installation Menu User ControlsAcer Empowering Technology Empowering KeyUsing the OSD menus Onscreen Display OSD MenusColor Image Rear-Ceiling AspectRatio Auto KeystoneSetting Closed Caption EnableMenu Location Source LockUser Password Timeout MinSecurity Administrator Password ResetECO Mode ManagementAudio Timer LanguageTroubleshooting AppendicesEnglish Problems with the Projector OSD Messages LED & Alarm Definition Listing LED MessagesReplacing the Lamp Ceiling Mount Installation Attach the ceiling bracket to the ceiling rod Adjust the angle and positioning as necessary Specifications Below items are for X1230/X1230S only VGA Analog PC Signal Compatibility ModesYPbPr Signal Secam FCC notice Operation conditionsDeclaration of Conformity for EU countries Remarque à lintention des utilisateurs canadiensRadio device regulatory notice General Article 3.1a Health and Safety European Union EUList of applicable countries Article 3.1b EMCFederal Communications Commission Declaration of Conformity Article 3.2 Spectrum Usages -. EN300 328