Acer P3150 Series, P3250 Series manual Usage notes, Precautions

Page 10

x

First thing first

Usage notes

Do:

Turn off the product before cleaning.

Use a soft cloth moistened with mild detergent to clean the display housing.

Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

Don't:

Block the slots and openings on the unit provided for ventilation.

Use abrasive cleaners, waxes or solvents to clean the unit.

Use under the following conditions:

In extremely hot, cold or humid environments.

In areas susceptible to excessive dust and dirt.

Near any appliance that generates a strong magnetic field.

Place In direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

Please do not open or disassemble the product as this may cause electric shock.

When changing the lamp, please allow unit to cool down, and follow all changing instructions.

This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages.

Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module.

When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.

Turn on the projector first and then the signal sources.

Do not use lens cap when projector is in operation.

When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

Image 10
Contents Acer Projector P3150/P3250 Series Users Guide Page Information for your safety and comfort Turning the product off before cleaningUsing electrical power Additional safety information Product servicingPage Operating environment for using wireless function Optional Medical devicesVehicles Potentially explosive environmentsDisposal instructions Mercury advisory Precautions Usage notesContents Regulations and safety notices Product Features IntroductionPackage Overview Front / upper side Projector OverviewProjector Outlook Rear sideControl Panel Function DescriptionRemote Control Layout Icon Function DescriptionRGB Connecting the Projector Getting StartedTurning the Projector On/Off Turning on the ProjectorTurning off the Projector Projector Overheated. Lamp will automatically turn off soonTo raise the image Adjusting the Projected ImageAdjusting the Height of Projected Image To lower the imageHow to optimize image size and distance Max screen size77 x Height 102 x 122 x 105 Acer eTimer Management Acer Empowering TechnologyEmpowering Key Acer eView ManagementUsing the OSD menus Onscreen Display OSD MenusColor setting Display ModeImage setting TintEnglish Management setting Security English Audio setting Timer settingLanguage setting Troubleshooting Image Problems and SolutionsEnglish OSD Messages Condition Message ReminderProblems with the Projector Condition SolutionLED & Alarm Definition Listing LED MessagesReplacing the Lamp Specifications DLPEnglish Compatibility modes VGA AnalogVGA Analog Extended Wide timing Hdmi PC Signal Hdmi DigitalHdmi Extended Wide timing FCC notice Operation conditionsDeclaration of Conformity for EU countries Remarque à lintention des utilisateurs canadiensRadio device regulatory notice General European Union EU List of applicable countriesFederal Communications Commission Declaration of Conformity Declaration of Conformity