Acer P3250 Series, P3150 Series manual OSD Messages, Condition Message Reminder

27

9	Image is too small	•	Adjust the zoom lever on the top of the projector.
	or too large	•	Move the projector closer to or further from the
			screen.
		•	Press "MENU" on the remote control or on the
			control panel. Go to "Image setting --> Aspect
			Ratio" and try different settings.
10	Image has slanted	•	If possible, reposition the projector so that it is
	sides		centered on the screen.
		•	Press the "Keystone / " button on the control
			panel or remote control until the sides are vertical.
11	Image is reversed	•	Select "Image --> Projection" on the OSD and adjust
			the projection direction.

OSD Messages

#	Condition	Message Reminder
1	Message	Fan Fail - the system fan is not working.
		Projector Overheated - the projector has exceeded its
		recommended operating temperature and must be allowed to
		cool down before it may be used.
		Replace the lamp - the lamp is about to reach its maximum
		lifetime. Prepare to replace it soon.

English