21
Note: This screen capture function is limited by 4:3 aspect ratio only.
Note: For XGA models, to get best quality for you desired image, suggest
Lamp Hour Elapse | Displays the lamp’s elapsed operating time (in hours). | ||
|
| ||
Lamp Reminding | Activate this function to display a reminder to change the lamp 30 | ||
| hours before its expected | ||
|
|
|
|
Lamp Hour Reset | Press the | button after choosing "Yes" to turn the lamp hour | |
| |||
| counter to 0 hours. | ||
|
|
| |
Security | Security |
| |
| This projector provides a useful security function for the | ||
| administrator to manage usage of the projector . | ||
| Press |
| to change the "Security" setting. If the security function |
| is enabled, your must enter the "Administrator Password" first | ||
| before changing the security settings. | ||
| • | Select "On" to enable the security function. The user has to | |
|
| enter a password to operate the projector. Please refer to the | |
|
| "User Password" section for details. | |
| • | If "Off" is selected, then the user can turn on the projector | |
|
| without password. | |
Timeout(Min.)
Once "Security" is activated to "On", the administrator can set timeout function.
•Press 
or 
to select the timeout interval.
•The range is from 10 minute to 990 minutes.
•When the time is up, the projector will prompt the user to enter the password again.
•The factory default setting of "Timeout(Min.)" is "Off".
•Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue.