User Controls
English ... 26
Management
(Computer / Video
Mode)
Lamp Hour Reset
Press the 
button after choosing “Yes ”to reset the lamp hour
counter to 0.
Security
Press 
to start “Security” setting. If the “Security” function is enabled, your must enter “Administrator Password” first before Security setting.
Security
This projector provides an excellent security function for the administrator to manage the usage of the projector .
Select “On” to enable the security function. User have to enter password depending on the ” Security Mode” . Please refer to ”User Password” section for details.
Select “Off” then user can switch on the projector without password.
Once the security function is enabled, the projector
will request user to enter password when switch on the projector. Both “User Password” and “Administrator Password” can be accepted for this dialogue.