Barco DATA 708 installation manual Installation SET UP, Access to controls

Installation Set Up

4 INSTALLATION SET UP

Access to controls

Opening procedure :

During the projector set up and installation it is neces- sary to open the top cover.

To gain access, procede as follow :

*Turn both lock screws with a screwdriver or a coin counter clockwise.

*Lift up and pivot the top cover.

*Support the top cover with the hand, no support is incorporated.

During some installations it will become handy to remove the top cover totally.

Therefore,

- pivote the top cover ± 60°

-push the top cover to the front side of the projector until it jumps out of its hings.

-Turn the top cover till 90° and lift it up.

Re-install the cover :

Hook the top cover into the cabinet hinges. Pivot the top cover 30° and pull it backwards until it fits in the hinges. Close the cover and secure the lock screws by turning clockwise with a screwdriver or coin.

5975987A BARCODATA 708 260597 1-1