keep parallel interface in fast operation, please adjust in setup window the switch positions both 1, and 2 to ON leaving the rest unchanged as factory default setting.
3.Peripheral connection
The peripheral controller is a 6 pin RJ11 jack between the power connector and the parallel connector. With use of Posiflex cash drawer cable 20863018001
When the printer is used as a kitchen printer, please use this port for kitchen bell connection instead.
4.Power connection
The power connector is a 3 pin jack at the rightmost position in the connector area. Either a Posiflex supplied power adaptor or a printer power cable from a Posiflex POS system can be connected to this connector to supply power for this printer. During insertion of the power plug, be sure to hear the click to obtain a firm contact.
CAUTION: Before doing the insertion or extraction of the power plug, be sure to pull the outer sleeve of the plug backward to release the internal latch. Failure to do this could damage the power plug. Such damage is considered as an artificial destruction and is not covered by the warranty.
2 - 3