3M H10 manual Input Menu, Video NR, Information, S2-ASPECT

Multifunctional Settings (continued)

INPUT Menu (continued)

Item Description

Select a Noise Reduction Mode:

HIGH ⇔ MIDDLE ⇔ LOW

•This function performs only at a VIDEO input or a S-VIDEO input. At a VIDEO input of NTSC 3.58, this function performs only when the TURN OFF is

VIDEO NR selected under the 3D-YCS.

•When the HIGH, the MIDDLE or the LOW is selected, the noise on screen is reduced according to each mode.

•When this function is excessive, it may cause a certain degradation of the picture.

Select the Progressive Mode:

TV ⇔ FILM ⇔ TURN OFF

•This function performs only at an interlaced signal of a VIDEO input, a S- VIDEO input or a COMPONENT VIDEO input of 525i or 625i signal. The FILM mode is adaptable to the 3-2 Pull-Down system to the conversion.

PROGRESSIVE • When the TV or FILM is selected, the screen image will be crisper. But it may cause a certain defect (for example, jagged line) of the picture at a quick moving object. In such a case, please select the TURN OFF, even though the screen image may lose the crisp.

•This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF.

Display the Information:

Pressing the or the ENTER button performs this function.

• Use this function when you want the information about the current input (ex.

INFORMATION

the resolution and the vertical frequency at a RGB input, the signal type of a video input) and setting states of the COMPONENT, the VIDEO and the

FLAME LOCK.

Select the S2-ASPECT Mode:

TURN ON ⇔ TURN OFF

• This function performs only at a S-VIDEO input.

• When the TURN ON is selected, an S2-Video signal can be identified and the

S2-ASPECT

optimum aspect ratio is automatically selected.

•When the ASPECT button of the remote control is used or the ASPECT item of the MAIN menu is operated, the S2-ASPECT mode will be switched to the TURN OFF automatically.

	Reset the INPUT Menu Items:
	Selecting the EXECUTE performs this function.
RESET	EXECUTE	⇒ CANCEL
	• The items of the INPUT menu are collectively returned to the initial setting.
	Note that the INFORMATION item is not reset.

28