3M H10 manual Option Menu, Volume, Lamp Time

Page 31

Multifunctional Settings (continued)

 

 

 

MENU

 

 

 

 

 

 

 

 

MAIN

VOLUME

16

 

 

 

 

 

 

PICTURE-1

LAMP TIME

1234h

OPTION Menu

 

 

 

 

PICTURE-2

FILTER TIME

21h

 

 

 

 

AUTO

 

 

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

 

SCREEN

 

 

With the OPTION menu, the items shown in the table below can be performed.

 

 

OPTION

 

 

 

 

 

Perform each operation in accordance with the instructions in the table below.

: SELECT

 

 

Item

 

 

 

 

Description

 

 

 

VOLUME

Adjust Volume: High

⇔

Low

 

 

 

 

To begin the operation of this item, please press the

button of the

 

 

projector or the RESET button of the remote control for 3 seconds.

 

 

Reset the Lamp Timer:

 

 

 

 

 

 

Selecting the RESET performs this function.

 

 

 

 

RESET

⇒ CANCEL

 

 

 

 

 

•The numerical value of four digits shown on this menu is the projector use time since the last RESET operation of this item. The value is reset to 0 at the

LAMP TIME

same time the RESET is selected.

•The value of this function is used to display the message of “CHANGE THE LAMP”. So this function must be performed only immediately after replacing the lamp.

Do not perform this function unless you have replaced the lamp. Perform this function every time the lamp is replaced. Incorrect performing of this function causes incorrect operation of the message function.

•Please see to the section “Lamp” about replacing the lamp.

To begin the operation of this item, please press the button of the projector or the RESET button of the remote control for 3 seconds.

Reset the Filter Timer:

Selecting the RESET performs this function.

RESET

⇒ CANCEL

• The numerical value of four digits shown on this menu is the projector use

time since the last RESET operation of this item. The value is reset to 0 at the

same time the RESET is selected.

FILTER TIME • The value of this function is used to display the message of “CLEAN THE AIR

FILTER”. So this function must be performed only immediately after cleaning

or replacing the air filter.

Do not perform this function unless you have cleaned or replaced the air filter.

Perform this function every time the air filter is cleaned or replaced. Incorrect

performing of this function causes incorrect operation of the message

function.

 

• Please see to the section “Air Filter” about cleaning and replacing the air

filter.

 

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents H10 Multimedia Projector Contents Preparation Projector FeaturesSlowly turn the projector so that the top is facing up Part NamesProjector Attaching The BaseProjector To adjust the keystoneRemote Control Arrangement Setting UpTwisting the elevator feet by hand Adjusting The Projectors ElevatorAdjust the height of the projector by As necessary, you can also finelyConnecting Your Devices AUDIO-L AUDIO-R G B R Connecting to a computerConnecting Power Supply Putting Batteries Remote ControlRemove Battery cover Close Battery coverOperating The Remote Control Remote control Power ON/OFFTurning On The Power Make sure that the power cord isUse the focus ring to focus the picture Selecting An Input SignalSelecting a RGB signal Use the zoom ring to adjust the screen SizeSwitch the power switch to O OFF Turning Off The PowerOperating Adjusting The VolumeTemporarily Muting The Sound Use Buttons to adjust Position Adjusting The PositionPress the Position button Correcting Keystone Distortions Using The Automatic Adjustment FeaturePress the Magnify on button Using The Magnify FeatureUse Buttons to adjust the zoom Level Freezing The ScreenSelecting The Aspect Ratio Signal SearchingTemporarily Blanking The Screen Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu LOAD4 Load/Save a SettingReset the PICTURE-1 Menu Items Picture 1 MenuSize PhasePicture 2 Menu PositionFrame Lock Input MenuColor Space VideoS2-ASPECT Input MenuVideo NR InformationAuto Menu AdjustSearch Start UP Screen MenuMessage Option Menu VolumeLamp Time Lamp Replacing The Lamp Air Filter Reset the filter timerCaring For The Air Filter Filter cover Replacing The Air FilterHold the release buttons of the air Filter, while pulling down itCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRelated Messages Power Lamp Temp Description Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Video Input Ports SpecificationsSpecification RGB Input Ports Audio PortsNot Included with Basic Packet ………………………………… Part Number AccessoriesAccessories ……………………………………………………… Part Number How to OrderDN00671 H10OGENG

H10 specifications

The 3M H10 series represents the pinnacle of head protection technology, designed to meet the rigorous demands of various industries while prioritizing user comfort and safety. With a focus on innovative features, the H10 combines advanced materials and engineering to deliver exceptional performance in protective headgear.

One of the standout features of the 3M H10 is its robust construction. Made with high-quality polycarbonate material, the helmet is lightweight yet highly durable, ensuring that it can withstand the rigors of industrial environments. Its impact-resistant design not only protects against falling objects but also enhances user safety during potentially hazardous operations.

The H10 series incorporates 3M’s proprietary Comfort System, which significantly improves wearability. The helmet is fitted with a moisture-wicking liner that actively draws perspiration away from the skin, allowing for extended use without discomfort. The adjustable suspension system provides a customized fit, accommodating various head sizes and promoting stability. This ensures the helmet remains securely in place, increasing protection while allowing for easy movement.

Another important characteristic of the H10 is its versatility. The helmet is compatible with a range of 3M attachment accessories, such as visor mounts, hearing protection, and communication devices, making it suitable for diverse applications, from construction and manufacturing to logging and mining. This adaptability enhances its functionality, offering users an all-in-one solution for head protection and additional safety measures.

In addition to these features, the 3M H10 is designed with ventilation in mind. Thoughtfully placed vents allow for optimal airflow, reducing heat buildup during long periods of wear. This attention to comfort is crucial, especially in warm weather conditions or during physically demanding tasks.

Moreover, the 3M H10 series is compliant with international safety standards, ensuring that it meets or exceeds the expected performance criteria for head protection. This commitment to quality provides peace of mind for both employers and employees, knowing that they are protected with some of the best technology available in the market.

In conclusion, the 3M H10 series exemplifies the intersection of safety, comfort, and versatility in head protection. With its durable materials, user-friendly design, and compatibility with accessories, the H10 stands out as a reliable choice for various industries, promoting safety without compromising comfort. As workplaces continue to prioritize employee well-being, the 3M H10 series is a vital investment in ensuring a safer working environment.
Top Page Image Contents