3M S50C, X50C manual Option Menu, Volume, Auto OFF, Whisper

Page 29

MULTIFUNCTIONAL SETTINGS (continued)

OPTION Menu

With the OPTION menu, the five items shown in the Table below can be performed.

Please perform each operation in accordance with the instructions in the Table.

MENU

MAIN

VOLUME

PICTURE-1

AUTO OFF

PICTURE-2

WHISPER

INPUT

LAMP TIME

SCREEN

FILTER TIME

OPTION

 

12

: SELECT

Example : OPTION Menu

(VOLUME)

OPTION Menu

Item

 

 

Description

VOLUME

Adjust Volume: High

⇔

Low

AUTO OFF

Adjust AUTO OFF Time:

Long (MAX. 99 min.) ⇔ Short (Min. 1 min.) ⇔ (DISABLE: 0 min.) The system automatically enters the standby mode if no signal is received within the set time. This function is inactive when DISABLE (0 min.) is selected.

WHISPER

Select WHISPER Mode:

NORMAL ⇔ WHISPER

When WHISPER is selected the WHISPER mode is activated. In the WHISPER mode, acoustic noise and screen brightness are reduced.

Refer to LAMP TIME: When set, this function displays the total time the projector lamp has been used since new.

Reset LAMP TIME [Use this function only when the lamp has been replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the lamp with a

LAMP TIME new lamp, select RESET on the menu with the button.

•Do not reset the lamp time unless you have replaced the lamp. And, always reset the lamp time when replacing the lamp. The message functions will not operate properly if the lamp time is not reset correctly.

•Before replacing the lamp, carefully read the descriptions headed "THE LAMP".

Refer to FILTER TIME: This function displays the total time the air-filter has been used since new.

Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:

Depress the RESET button for at least 3 seconds while filter time is being displayed. The reset menu will then appear. After you replace the filter, select

FILTER TIME RESET on the menu with the button.

DEFAULT ⇔ CANCEL

•Do not reset the filter time unless you have cleaned or replaced the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly.

•Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".

28

Page 28 Page 30
Image 29
Page 28 Page 30
Contents S50C/X50C Multimedia Projector S50C/X50C Multimedia Projector Operators Guide ContentsProjector Features Connect your devices to the projector Projector Part NamesRemote Control Adjusting the Projectors Elevator Foot Setting UP the ProjectorAdjust the left-right slope Projector by twisting the rear foot Adjuster screw by handTop view Side view Adjusting the Screen Size and Projection DistanceConnecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Operating the remote control Using the Remote ControlPutting batteries into the remote control unit Turning on the Power Use the zoom ring to adjust Selecting an Input SignalScreen size Use the focus ring to focus the pictureTurning OFF the Power Press the Volume button Adjusting the VolumePress Buttons to adjust Volume Temporarily Muting the SoundPress the Position button Adjusting the PositionUse Buttons to adjust Position Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsFreezing the Screen Using the Magnify FeatureTemporarily Blanking the Screen Signal SearchingSelecting the Aspect Ratio Select a menu using Buttons Then press Or Enter button Using the Menu FunctionsSelect an item using Buttons, then press Or Enter button Press Buttons to adjust the levelMain Menu Multifunctional SettingsMain Menu Picture 2 Menu Picture 1 MenuPICTURE1 Menu PICTURE2 MenuInput Menu Input MenuAuto VideoScreen Menu Screen MenuBlank Start UPOption Menu VolumeOption Menu Auto OFFOperating the PC Screen Available Functions Remote Control OperationLamp High Voltage High Temperature High PressureReplacing the lamp Air Filter AIR FilterCaring for the air filter Replacing the air filter Other Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lensRelated Messages Power Lamp Temp Description Regarding the Indicator LampsItems to be confirmed Phenomena That May Easily Be Mistaken for Machine DefectsPhenomenon Specification SpecificationsDimension Diagram Not Included with Basic Packet Part Number Accessories Part NumberHow to Order DN00571 S50/X50OGENG

S50C, X50C specifications

3M has long been a leader in the adhesive industry, continually pushing the boundaries of innovation and performance. Among its notable products are the 3M X50C and S50C adhesive technologies, which exemplify the company's commitment to providing high-quality solutions for a range of applications.

The 3M X50C adhesive is a polyurethane-based adhesive that showcases exceptional versatility and strong bonding capabilities. One of its standout features is its excellent chemical resistance, making it suitable for applications in harsh environments where exposure to solvents and chemicals is common. This characteristic ensures that the bond remains intact even in challenging conditions, which is crucial in industries such as automotive, construction, and manufacturing.

In addition to its chemical resistance, the X50C offers impressive temperature resistance, maintaining stability and performance in both high and low-temperature environments. This makes it ideal for applications where temperature fluctuations can impact the adhesion integrity. The X50C also boasts excellent flexibility, allowing it to accommodate movement between bonded substrates without compromising the bond strength.

On the other hand, the 3M S50C adhesive is a high-performance structural adhesive known for its fast curing times and strong initial tack. This feature significantly reduces assembly times in manufacturing processes, providing immense cost and time savings. The S50C is particularly effective for bonding dissimilar materials, making it well-suited for use in industries that require meticulous assembly of varied substrates.

Both the X50C and S50C adhesives utilize advanced technologies that contribute to their superior performance. They are formulated using 3M's proprietary formulations, which enhance adhesion, durability, and application ease. The adhesives come packaged in user-friendly formats, including cartridges for precise dispensing, ensuring that users achieve optimal results with minimal waste.

Furthermore, both products emphasize safety and environmental considerations. With low VOC (volatile organic compound) levels, they contribute to healthier working environments and comply with stringent regulatory standards.

In summary, 3M X50C and S50C adhesives stand out for their strong bonding capabilities, chemical and temperature resistance, flexibility, and user-friendly application. These adhesives showcase the ongoing commitment of 3M to innovate and provide high-performance solutions across various industries, ensuring reliable results and enhanced productivity in adhesive applications.
Top Page Image Contents