3M X50C, S50C manual Replacing the lamp

Page 32

THE LAMP (continued)

Replacing the lamp

All projector lamps will wear out eventually. If used for long periods of time, the image could become darkened, and the color contrast could be impacted as well. We recommend that you replace your lamps early. If the lamp indicator turns red, or a message prompts you to replace the lamp when you power up the projector, the lamp needs to be replaced. (See "Related Messages" ( 35 ) and "Regarding the Indicator Lamps" ( 36 ) for details.)

1

Turn off the projector, and unplug the

power cord. Allow the lamp bulb to cool

 

for at least 45 minutes, and prepare a

 

new lamp (sold separately:

 

78-6969-9599-8).

 

 

 

 

2

After making sure that the projector has

cooled adequately, slowly flip over the

projector, so that the bottom is facing up

5

Insert the new lamp, and tighten the 1

screw firmly to lock it in place

• Also steadily push the opposite side of the screwed side of the

lamp into the unit.

3 Unscrew the 2 screws, and remove the lamp door

6

Replace the lamp door, and tighten

the 2 screws firmly to lock it in

place

4

Unscrew the 1 screw, and slowly pull

out the lamp by the handle

• Be careful not to touch the inside of the lamp case.

7

Slowly turn the projector so that

the top is facing up

 

 

 

 

8

Turn on the projector power, and using

the menu, reset the lamp timer

• To reset the lamp timer, from the OPTION menu, select LAMP TIME.

ATTENTION • Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.

•Do not use with lamp door removed.

•Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.

•When the lamp has been replaced after the message of "CHANGE THE LAMP ...THE POWER WILL TURN OFF AFTER 0 hr." is displayed, or the lamp indicator is red, complete the following

operation within 10 minutes of switching power ON.

NOTE • The lamp indicator is also red when the lamp unit reaches high temperature. Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power ON again. If the lamp indicator is still red, replace the lamp.

31

Page 31 Page 33
Image 32
Page 31 Page 33
Contents S50C/X50C Multimedia Projector Contents S50C/X50C Multimedia Projector Operators GuideProjector Features Connect your devices to the projector Part Names ProjectorRemote Control Setting UP the Projector Adjusting the Projectors Elevator FootAdjust the left-right slope Projector by twisting the rear foot Adjuster screw by handAdjusting the Screen Size and Projection Distance Top view Side viewConnecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Operating the remote control Using the Remote ControlPutting batteries into the remote control unit Turning on the Power Selecting an Input Signal Use the zoom ring to adjustScreen size Use the focus ring to focus the pictureTurning OFF the Power Adjusting the Volume Press the Volume buttonPress Buttons to adjust Volume Temporarily Muting the SoundPress the Position button Adjusting the PositionUse Buttons to adjust Position Using the Automatic Adjustment Feature Automatic Adjustment for RGB InputAutomatic Adjustment for Video Input Press the Auto buttonCorrecting Keystone Distortions Press the Keystone buttonUsing the Magnify Feature Freezing the ScreenTemporarily Blanking the Screen Signal SearchingSelecting the Aspect Ratio Using the Menu Functions Select a menu using Buttons Then press Or Enter buttonSelect an item using Buttons, then press Or Enter button Press Buttons to adjust the levelMain Menu Multifunctional SettingsMain Menu Picture 1 Menu Picture 2 MenuPICTURE1 Menu PICTURE2 MenuInput Menu Input MenuAuto VideoScreen Menu Screen MenuBlank Start UPVolume Option MenuOption Menu Auto OFFAvailable Functions Remote Control Operation Operating the PC ScreenHigh Voltage High Temperature High Pressure LampReplacing the lamp Air Filter AIR FilterCaring for the air filter Replacing the air filter Caring for the cabinet and remote control transmitter Other CareCaring for the inside of the projector Caring for the lensRelated Messages Regarding the Indicator Lamps Power Lamp Temp DescriptionItems to be confirmed Phenomena That May Easily Be Mistaken for Machine DefectsPhenomenon Specification SpecificationsDimension Diagram Not Included with Basic Packet Part Number Accessories Part NumberHow to Order DN00571 S50/X50OGENG

S50C, X50C specifications

3M has long been a leader in the adhesive industry, continually pushing the boundaries of innovation and performance. Among its notable products are the 3M X50C and S50C adhesive technologies, which exemplify the company's commitment to providing high-quality solutions for a range of applications.

The 3M X50C adhesive is a polyurethane-based adhesive that showcases exceptional versatility and strong bonding capabilities. One of its standout features is its excellent chemical resistance, making it suitable for applications in harsh environments where exposure to solvents and chemicals is common. This characteristic ensures that the bond remains intact even in challenging conditions, which is crucial in industries such as automotive, construction, and manufacturing.

In addition to its chemical resistance, the X50C offers impressive temperature resistance, maintaining stability and performance in both high and low-temperature environments. This makes it ideal for applications where temperature fluctuations can impact the adhesion integrity. The X50C also boasts excellent flexibility, allowing it to accommodate movement between bonded substrates without compromising the bond strength.

On the other hand, the 3M S50C adhesive is a high-performance structural adhesive known for its fast curing times and strong initial tack. This feature significantly reduces assembly times in manufacturing processes, providing immense cost and time savings. The S50C is particularly effective for bonding dissimilar materials, making it well-suited for use in industries that require meticulous assembly of varied substrates.

Both the X50C and S50C adhesives utilize advanced technologies that contribute to their superior performance. They are formulated using 3M's proprietary formulations, which enhance adhesion, durability, and application ease. The adhesives come packaged in user-friendly formats, including cartridges for precise dispensing, ensuring that users achieve optimal results with minimal waste.

Furthermore, both products emphasize safety and environmental considerations. With low VOC (volatile organic compound) levels, they contribute to healthier working environments and comply with stringent regulatory standards.

In summary, 3M X50C and S50C adhesives stand out for their strong bonding capabilities, chemical and temperature resistance, flexibility, and user-friendly application. These adhesives showcase the ongoing commitment of 3M to innovate and provide high-performance solutions across various industries, ensuring reliable results and enhanced productivity in adhesive applications.
Top Page Image Contents