3M MP8790 manual Using the Magnify Feature, Freezing the Screen

USING THE MAGNIFY FEATURE

DOWN

BLANKLASER

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION AUTO PinP

MAGNIFY	VOLUME
ON
FREEZE	MUTE
OFF
WIRELESS KEYSTONE	ONE TOUCH

NOTE

1	Press the MAGNIFY (ON) button		MAGNIFY
	The projector enters MAGNIFY mode.		ON
2	Press the POSITION button, then use the lever switch
	/	, / to select the area to zoom. Press the
	POSITION button again to finalize the zoom area.
		POSITION	POSITION

3 Use the lever switch / to adjust the zoom level

Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore the screen to normal. (The projector will also automatically exit MAGNIFY mode if there is a change in the input signal's state.)

The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.

FREEZING THE SCREEN

PUSH			Press the FREEZE button
ENTER			1 The [II] icon appears and the screen will freeze at FREEZE
ESC	MENU	RESET
POSITION	AUTO	PinP	the current image. Press the FREEZE button again
			and the [▲] appears as the projector exits FREEZE
MAGNIFY		VOLUME	mode.
ON
	FREEZE	MUTE
OFF
WIRELESS	KEYSTONE ONE TOUCH

NOTE

•The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO, BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.

•If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),

the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.

22