3M MP8790 manual Other Care, Caring for the inside of the projector, Caring for the lens

Page 38

OTHER CARE

Caring for the inside of the projector :

In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous.

Caring for the lens :

Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand.

Caring for the cabinet and remote control transmitter :

Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

ATTENTION • Make sure to turn off the power and unplug the power cord before caring for the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector correctly.

•Do not use cleaners or chemicals other than those listed above, including benzene and paint thinner.

•Do not use aerosols or sprays.

•Do not polish or wipe with hard objects.

37

Image 38

Contents MP8790 Multimedia Projector Contents MP8790 Multimedia Projector Operators GuideCable Projector FeaturesFor the remote control Only use the power cord that came with the projector Devices you will be using to the projectorPart Names Enter button Mouse cursor movement Left mouse clickRight mouse click Press and hold in the elevator Buttons Setting UP the ProjectorAdjusting the Projectors Elevator Feet Turn the elevator screw to fine tuneAdjusting the Screen Size and Projection Distance ScreenConnecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI Input A a aConnecting to a Display Monitor Connecting to a DVD PlayerConnecting to a VCR Remove the battery cover Using the Remote ControlPutting batteries into the remote control unit Close the battery coverMeters with a 40-degree range Using the Remote ControlOperating the remote control Range of the remote sensor on the front isTurning on the Power Turning on the Power Selecting an Input SignalTurning OFF the Power Use the lever switch / to adjust the volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundPress the Position button Adjusting the PositionUse the , , , buttons to adjust the position Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonAs illustrated on the right, a dialog will appear Correcting Keystone DistortionsPress the Keystone button On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenPress the ONE Touch button Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected You can activate the following functions just byPress the Aspect button Selecting the Aspect RatioTemporarily Blanking the Screen Press the Blank buttonPress the Menu button Using the Menu FunctionsUse the lever switch To adjust the level Main Menu Multifunctional SettingsMain Menu Or Enter buttonPICTURE-1 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuOption Menu Wireless MenuOption Menu Operating the PC Screen Turn on the projector power, then the computerAvailable Functions Remote Control Operation Do not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Knob of Lamp Cover Lock LampReplacing the lamp TabsAIR Filter Caring for the air filterAIR Filter Replacing the air filterCaring for the inside of the projector Caring for the cabinet and remote control transmitterOther Care Caring for the lensRelated Messages Regarding the Indicator Lamps Power Lamp TempItems to be confirmed Phenomena That May Easily Be Mistaken for Machine DefectsPhenomenon Specification SpecificationsDimension Diagram Unit mmAccessories Accessories Part NumberDN00351 QR55141OGENG