3M MP8745 manual Adjustments and Functions, How To Use Height Adjustment Feet

Section 4: Adjustments and Functions

4.1 How To Use Height Adjustment Feet

Adjust the image elevation using the height adjustment at the front of the projector.

1.Raise the front end of the projector so the feet are not touching the table top.

2.Push the lock button to unlock the foot.

3.Extend or retract each foot to the desired height.

4.Release the lock button to lock the foot into position.

5.For fine adjustments, rotate each foot.

Caution

Do not unlock the foot adjusters if the projector is not supported. If the foot adjusters do not lock completely, turn the foot adjusters slightly before locking.

Front View

MP8745

Side View
	1	RGB IN	2	S-VIDEO IN
				VIDEO IN
I	CONTROL		RGB OUT
O				AUDIO IN
				R
				MONO
				R
AUDIO IN		AUDIO
1	2	OUT	USB	MD05551
				MD05401

0-9O

Figure 4.1 Height Adjustment

ENGLISH

© 3M 1999 3M ™ Multimedia Projector MP8745 13