22
Language: allows you to select a language for the onscreen display.
•Custom key: allows you to assign a different function to the Custom
key on the remote, allowing you to quickly and easily use the effect. Highlight an effect and press Select to choose a different one.
•Blank Screen: displays a solid blank image.
•Freeze: takes a snapshot of the projected image. If you’re watching video, the source video continues to run but the image is frozen.
•Source Info: the default effect. It opens a window with projector and source information.
•Service Info: opens the Service info window.
•Source 4: selects source 4 (by default, Source 4 is the Composite input). This gives you four direct source options on the remote. See page 20.
Service: To use these features, highlight them and press
Select.
Factory Reset: restores all settings to their default.
Reset Lamp Hours: resets the lamp hours used in the Service Info menu to zero. Do this only after changing the lamp.
Test Pattern: displays a test pattern. To display test patterns, first you must assign Blank Screen to the Custom key (page 17), then click the Test pattern check box in the Service menu to turn the option on, exit the menus, then press the Custom button on the remote. To select the patterns, use the up/down arrows on the remote or keypad. To exit the test patterns press
the Custom button.
Blue Only: turns off the Red and Green portions of the input, allowing you to properly adjust the color balance with a SMPTE color bar pattern.
HDMI DDC: turns off the EDID extension. Some graphic cards cannot recognize the projector’s EDID. Uncheck this box if you have trouble using HDMI or DVI sources.
Service Info: provides information about the projector’s software, serial number and lamp.
Source Info: provides information about the active source.
Service Code: only used by authorized service personnel.