18
Menu options are grayed out only if the source is selected but no signal is present. For example, if the projector is set to a video source but the source, such as a DVD player, is turned off video menu options are grayed out.
Picture Menu
Increasing keystone
To adjust the following settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press Select to confirm the changes. Keystone: adjusts the image vertically and makes a squarer image. Tilt the projector up or down to adjust for keystone before using the digital keystone correction in the menu.
Contrast: controls the degree of difference between |
|
|
|
|
|
|
|
the lightest and darkest parts of the picture. |
| Decreasing |
| keystone | |||
|
| ||||||
Brightness: changes the intensity of the image. |
|
|
|
|
|
|
|
Color: adjusts a video image from black and white to fully |
|
|
|
|
|
| |
saturated color. |
|
|
|
|
|
|
|
Tint: adjusts the |
|
|
|
|
|
|
|
of NTSC video images. The tint setting applies to |
|
|
|
|
|
|
|
NTSC video sources only. |
|
|
|
|
|
|
|
Aspect Ratio: Aspect ratio is the ratio of the image width | Aspect ratio | ||||||
to image height. TV screens are usually 4:3. HDTV and |
|
|
|
|
|
|
|
most DVDs are 16:9. The projectors default is 16:9. |
|
|
|
|
|
|
|
See “Choosing the aspect ratio” on page 8 for more information. |
|
|
|
|
|
| |
Select Native to see the unmodified input with no resizing by |
|
|
|
|
|
| |
the projector. Select 16:9 to watch enhanced widescreen |
|
|
|
|
|
| |
DVDs. Select Letterbox to preserve the 16:9 aspect ratio. |
|
|
|
|
|
| |
If you have a 16:9 source and screen, the image fills |
|
|
|
|
|
|
|
the screen. If your source is letterboxed, the image is |
|
|
|
|
|
|
|
expanded to fill the screen. Select Natural Wide to |
|
|
|
|
|
|
|
stretch a 4:3 image to fill the entire 16:9 screen. |
|
|
|
|
|
|
|
The center |
|
|
|
|
|
| |
image are stretched. |
|
|
|
|
|
|
|
For more information regarding Aspect Ratio, see page 8. |
|
|
|
|
|
| |
| Presets |
|
|
|
|
|
|
Presets: This allows you to customize settings and save |
|
|
|
|
|
|
|
the settings to be restored later. To restore the factory |
|
|
|
|
|
|
|
default settings, choose Factory Reset in the |
|
|
|
|
|
|
|
Settings>Service menu. |
|
|
|
|
|
|
|
To set a preset for the current source, adjust | Save User Settings | ||||||
the image, select Save Settings in the Presets menu, |
|
|
|
|
|
|
|
then choose Save User 1, 2, or 3. You can recall these settings in the future by selecting the appropriate user presets. All settings in the Picture menu (except Keystone) are saved and recalled.