26
RS232 COMMAND FORMAT
All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can be a read request (indicated by a “?”) or a write request (indicated by 1 to 4 ASCII digits).
A read request format (AAA?) where
(starts the command AAA denotes the command
? denotes the read request
) ends the command
A read command returns the range and the current setting, for example:
Function | Command | Response | |
Brightness | (BRT?) |
| |
Lamp hours | (LMP?) | ||
A write request example: (AAA####) where
(starts the command AAA denotes the command
#### denotes the value to be written (leading in zeros not necessary)
) ends the command
Some commands have ranges, while others are absolute. If a number greater than the maximum range is received, it is automatically set to the maximum number for that function. If a command is received that is not understood, a “?” is returned. With absolute settings, “0” is off,
Function | Command | Response |
Brightness | (BRT10) | Sets brightness to 10 |
Power | (PWR0) | Turns power off |
Power | (PWR1) | Turns power on |
Power | (PWR9999) | ? |