10 - COMMISSIONING YOURCONDITIONER

IV- Installing the r emote control

You can install the remote control inside your cellar.
We recommend that you place it as close as possible to the bottles.
Fix the unit close to your bottles using the supplied pegs and screws (see diagram below)
N.B.: Do not place the remote control in the path of the conditioner’s cold air ow.
It is also possible to place the remote control outside the cellar.
In this case,an ex ternal sensor ( supplied) must be connected to the remote control and then the remote control must be reprogrammed.
For further details,contact your EuroC ave retailer.

V- Setting the temperature

Setting the temperature of your conditioner is carried out entirely from the remote control which has the following layout:
- Temperature display: displays the actual temperature inside
your cellar.
- Setting keys: allow you to select the desired temperature
inside the cellar.
To adjust the temperature:
- Press then immediately release the key.
The setting then appears (the temperature ashes).
- - When the temperature ashes,you have 7 seconds to change the setting by pressing the or keys,otherwise the display automatically returns to
the previous setting.
The recommended setting range for maturing wine:10 to 14°C .
Temperature
units (according
to the country)
Selection and conrmation key
Cellar
temperature
display
Cellar temperature
setting keys
Temperature
indicator
19