Mouse Connection, Apple Desktop Mouse

Female Mini-DIN

System Setup

Mouse Connection

The general cable links the projector to the proper mouse adapter cable for your computer.

1.Attach the male Mini-DIN end of the general cable to the Mouse port on the rear of the projector.

2.Attach the female Mini-DIN end of the general cable to the end of the proper mouse adapter cable for your computer (serial, PS/2 or ADB cable). Line up the arrows on the sides of the plugs before attaching. Be sure not to bend or break the small metal pins inside the plugs.

3.Attach the other end of the mouse adapter cable to the proper port on your computer (serial, PS/2 or ADB).

General cable

Male Mini-DIN

Apple™ Desktop Mouse

The Macintosh operating system should recognize the MP7730 as a mouse without any drivers being loaded.

VirtualMouse for PC Computer

For IBM™ compatible computers, set the operating systems to Serial Mouse or PS/2 Mouse to recognize projec- tor as the mouse pointer device.

To set mouse driver information:

a)Windows™ 95/Windows™ 98/Windows™ NT

1.Select Start/Settings/Control Panel.

2.Select Add New Hardware.

3.“Windows will now search for any PnP devices...” Click Next.

4.Hardware Types: Scroll down to Mouse. Click Mouse.

5.Select Manufacturer: Standard Mouse Type

6.Select Model: Standard Serial Mouse

7.Click Next, Finish, Start.

8.Restart Windows if prompted.

b)Windows™ 3.1

From Program Manager

1.Click Main

2.Click Windows Setup (make note of the current mouse driver)

3.Click Options

4.Then Change Systems Settings

5.Choose Mouse

6.It should be listed as Microsoft or IBM PS/2

✓Note: For proper mouse operation, always turn the projector power on first and power up the computer. For some laptop computers, you may need to disable the internal pointing device (IPD). This is done through the BIOS level set-up of the particular machine, or it could be listed in a “Utilities” program group, i.e., “Toshiba Utilities ™ ,” or “Thinkpad Features ™ .”

3M™ Multimedia Projector MP7730