3M MP7730 manual Operation, Startup

Page 16

Operation

Startup

1

Power

Note: Make all cable connections and line hookups with the power off.

2

Standby/On

Ground lead

The 2-prong adapter with ground is used with older U.S. electrical outlets that only support 2-prong power cord plugs.

Note: When using this adapter, the ground lead MUST be securely fastened to the ground screw on the outlet.

Plug the 2-prong adapter into the bottom socket of the eletrical outlet. Hook the end of the ground lead firmly around the neck of the outlet’s ground screw. Tighten the screw, if necessary, to hold the ground in place. Then plug the power cord into the adapter.

Standby/ON

Standby/On

Standby/On

1.Plug power cord into wall socket.

2.Press the STANDBY/ON button and hold for 3 seconds.

The ON indicator blinks green and then stays green.

The ON indicator will blink green during warm-up and lamp ignition.

(When power is turned off, there is a 90-second reset period before the STANDBY/ON button will function again.)

3. Turn on all connected equipment.

Note: If you have the Optional Video Module attached to the unit, press the Source button on the remote to select the source of the signal to be projected onto the screen. The selected signal input is displayed at the top right of the screen. The display will show the last selected input source before power was turned off. (For more information, please refer to the Optional Video Module section of this manual.)

16

3MMultimedia Projector MP7730

© 3M IPC 2000

Image 16
Contents MP7730 Multimedia Projector Page Table of Contents Introduction Important SafeguardsIntended Use Product Safety Labels For Home or Office USEWarranty Limited Warranty Thank You for Choosing 3MLimitation Of Liability Patents, Trademarks & CopyrightsOptional Accessories Shipping Box ContentsWhat’s Next? Part Identification Machine Characteristics External Control Pad ButtonsRemote Control Identification Standby/OnRemote Control Features VolumeFreeze MuteInstalling or Replacing Batteries LaserDisk Pad Click, L-ClickScreen Chart System SetupDigital Keystone Correction Connecting to Various Equipment Connection TerminalsApple Desktop Mouse Mouse ConnectionVirtualMouse for PC Computer Operation StartupMain Menu Menu PagesDisplay Menu MenuKeystone To Menu Items Image MenuTo Menu Items Operation MenuShutdown 000000 000100 000030 000130Optional Video Module FeaturesOptional Video Module Connections Attaching the Optional Video Module to the MP7730 Switching Input SignalsScanning Channels Image Sub-Menu Less MoreRed Green Source is video or S-video Normal VideoOperation Start SCANNING? Source Menu Maintenance Lamp Use and Replacement of LampLamp Replacement Resetting the Lamp Hours Troubleshooting Problems SolutionsStatus Indicator Lights and Messages Service Information AccessoriesNot Included with Basic Packet Ordering Parts or Getting InformationAppendix Dimensions Preset Display Resolution Table Resolution Sync kHz RemarkNtsc USA Page Important Notice