OPERATIONS (continued)
No Signal Menu
The same adjustments and settings are available as with the Image and Options menus when the MENU button is pressed during display of the “NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE ON ***” message while no signal is received.
Table 7. No Signal Menu
VOLUME
KEYSTONE BLANK 
MIRROR 
START UP 
MENU COLOR 
TIMER 
LANGUAGE 
AUTO OFF 
SYNC ON G 
40
+1
Item | Description | |
VOLUME | Volume adjustment: Reduce VOLUME ↔ Increase VOLUME | |
|
| |
KEYSTONE | Adjustment: | |
Reduce size of bottom of image ↔ Reduce size of top of image | ||
| ||
|
| |
| Select blank screen color: Select color with the and buttons. | |
BLANK | • When the blank mode is set with BLANK ON, by absence of a signal, or by | |
input of a | ||
| ||
| displayed in the selected colour. |
MIRROR
Operation start/stop: Press the 
or 
button.
Select Mirror status: Select mirror status with 
and 
buttons.
| Operation start/stop: Press the or button. |
|
| Setup initial screen display: Select TURN ON with the | button. |
START UP | Clear initial screen display: Select TURN OFF with the | button. |
•Note that if TURN OFF is selected the blank screen is displayed in blue when there is no signal.
MENU COLOR Select menu background color: Select with the 
and 
buttons.
TIMER
Operation start/stop: Press the 
or 
button.
Setup initial timer value: Set 1~99 minutes with the 
and 
buttons.
LANGUAGE
Operation start/stop: Press the 
or 
button.
Select menu display language: Select with the 
and 
buttons.
| Operation start/stop: Press the or button. |
| Set AUTO OFF: Set 1~99 minutes with the and buttons. |
| The system automatically enters the standby mode when a signal is |
AUTO OFF | not received for the set time. |
Clear AUTO OFF: Select STOP (0 min.) with the 
button.
When STOP is selected the system does not enter the standby mode even if no signal is received.
Operation start/stop: Press the 
or 
button.
SYNC ON G valid: Select TURN ON with the 
button.
SYNC ON G | SYNC ON G invalid: Select TURN OFF with the button. |
•May not be displayed correctly with some input signals when SYNC ON G is valid. In such cases, remove the signal connector so that no signal is received, set SYNC ON G to invalid, and reconnect the signal.