DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 16
Troubleshooting
Symptom |
| Cause |
| Correction |
No power. |
| The power cord is disconnected. |
| Plug the power cord into the wall |
|
| |||
|
|
|
| outlet securely. |
|
|
|
|
|
The power is on, |
| No disc is inserted. |
| Insert a disc. |
but the unit does |
|
|
|
|
not work. |
|
|
|
|
|
|
|
|
|
No picture. |
| The TV is not set to receive the |
| Select the appropriate video input |
|
| signal from the unit. |
| mode on the TV. |
|
|
|
|
|
|
| The video cable is not connected |
| Connect the video cable securely. |
|
| securely. |
|
|
|
|
|
|
|
No sound. |
| The equipment connected with |
| Select the correct input mode of |
|
| the audio cable is not set to |
| the audio amplifier. |
|
| receive the signal from the unit. |
|
|
|
|
|
|
|
|
| The AUDIO options are set to the |
| Set the AUDIO settings to the |
|
| wrong position. |
| correct position. |
|
|
|
|
|
The unit does not |
| An unplayable disc is inserted. |
| Insert a playable disc. (Check the |
start playback. |
|
|
| disc type and regional code.) |
|
|
|
|
|
|
| The rating level is set. |
| Change the rating level. |
|
|
|
|
|
The remote con- |
| The remote control is not pointed |
| Point the remote control at the |
trol does not work |
| at the remote sensor on the unit. |
| remote sensor of the unit. |
properly. |
|
|
|
|
| The remote control is too far from |
| Operate the remote control closer | |
|
|
| ||
|
| the unit. |
| to the unit. |
|
|
|
|
|
Specifications
General
Power requirements | AC 120V~60Hz |
Power consumption | 9W |
Dimensions (Approx.) | 430 x 35 x 200 mm |
| (W x H x D) without foot |
Net Weight (Approx.) | 1.5 kg |
Operating temperature | 5 °C to 35 °C |
Operating humidity | 5 % to 90 % |
Laser | Semiconductor laser |
Signal system | NTSC |
Outputs
Video Output | 1.0 V |
| RCA jack (L, R) x 1 |
Component Video Output | (Y) 1.0 V |
| RCA jack x 1 |
| (Pb)/(Pr) 0.7 V |
| RCA jack x 2 |
(Y) 1.0 V | |
| sync negative, Mini DIN |
| (C) 0.3 V, 75 Ω |
HDMI Video/Audio Output | 19 pin(HDMI standard, Type A) |
Audio Output | 2.0 Vrms (1 KHz, 0 dB), 600 Ω, |
| RCA jack (L, R) x 1 |
Digital Output (Optical) | 3 V |
Digital Output (Coaxial) | 0.5 V |
|
|
Accessories |
|
Video/Audio cable, Remote Control, Battery
Designs and specifications are subject to change without prior notice.
16