LG Electronics DN898 manual About Hdmi, Hdmi Connection

Page 6

DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 6

Hooking up the unit

HDMI Connection

Connect the HDMI OUTPUT jack on the unit to the HDMI input jack on an HDMI compatible TV using an HDMI cable.

Hooking up the unit - more you can do

Resolution Setting

You can change the resolution for HDMI output. Press RESOLUTION repeated- ly to select the desired resolution - 480i, 480p, 720p, 1080i, 1080p.

Note for 1080p resolution

The unit is able to provide a 1080p full HD image to most 1080p-capable TVs in the market today. However, there are some 1080p TVs available from certain companies that are limited in the types of 1080p images that can be accepted. Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display an image from this unit.

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices. HDMI was developed to provide the technologies of HDCP (High-band- width Digital Content Protection). HDCP is used to protect digital content transmitted and received.

HDMI has the capability to support standard, enhanced or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

Notes on HDMI connection

•If your TV is not capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 9).

•If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu

(See page 9).

•Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press RESOLUTION repeatedly unit the picture re-appears.

•Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again.

•When you connect a HDMI or DVI compatible device make sure of the following:

-Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720x480i, 720x480p, 1280x720p, 1920x1080i or 1920x1080p video input.

-The 1080p, 720p and 480p resolutions are the progressive scan applied resolution

•Not all HDCP-compatible DVI devices will work with this unit.

-The picture will not be displayed properly with non-HDCP device.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DV392H-N.CUSALLK0959ENG 2/20/08 937 AM Introduction Regulatory Information FCC PartImportant Safety Instructions Types of Playable Discs About the Symbol Display Regional CodesDVD-RW VR mode CopyrightsHooking up the unit Hooking up the unit more you can doAbout Hdmi Hdmi ConnectionPut the battery into the Remote Control Remote controlControlling other TV’s with the remote control Code numbers of controllable TVsMain Unit Adjust the settings Adjust the settings more you can doSymbol Used in this Manual Displaying Disc InformationDisplaying Disc Information more you can do Playing a Disc Playing a Disc more you can doPlaying MPEG4 movie file Playing MPEG4 movie filesMore you can do Listening to Music Disc or files more you can do Listening to Music Disc or filesViewing photo files Viewing photo files more you can doUsing a USB Flash Drive Language Codes Area CodesTroubleshooting SpecificationsLG Electronics, Inc. Limited Warranty USA
Top Page Image Contents